What materials are good for toilet leaks?

1. Smash the floor tiles: smash the floor tiles on the floor of the seepage bathroom, pay attention to the part on the wall that is at least 30CM high;

2. Eliminate the base surface: remove the base surface to ensure that there is no dirt and no oil stains; Sprinkle water to moisten the base surface, and no clear water is fine;

3. Do a good job in key areas: use the plugging king to give priority to solving key parts such as pipeline openings, corners, yin and yang angles, and thresholds;

4. Brush special waterproof coating: use the special waterproof material for the bathroom (reference: fire gecko backfill treasure) to brush twice in the cross type, and the second time can be brushed after the first dry solidification, and the total thickness of the ground waterproof is about;

5. Closed water test. After the acceptance of the waterproof layer reaches the standard, it can enter the next step of the tile process.

Toilet waterproof plugging materials can be used: polyurethane waterproof coating.

Repeat 2 to 3 times with polyurethane waterproof paint. Be sure to do wall waterproofing, water will splash on the adjacent wall when bathing in the bathroom, so be sure to do a good job of wall waterproofing before laying wall tiles. In general, the wall should be 30 cm to solve this problem, and the waterproof work should be done mainly to prevent the occurrence of leakage events.

Try not to damage the original waterproof layerIf you do not destroy the original waterproof layer, there will generally be no leakage after moving in. However, the waterproof layer is easy to be damaged when renovating the ground, and if it is accidentally damaged, it should be repaired in time to avoid leaving hidden dangers.

Master Bang, the insured waterproof leak repair service is more reliable!

KS waterproof penetrant This product is suitable for walls or joints composed of concrete, masonry, stone walls, cement, tiles and other materials and the surface of buildings; wood, parquet flooring and wood products, paper packaging, paper products; cloth, fibers and products thereof; Iron and steel products, etc. Note: The old and new toilets can be painted if they leak to avoid removing the tiles.

How to use: Shake this product slightly before use, clean up the impurities on the surface of the treated material, and use this agent under the condition of dry surface, not apply it twice in a row at intervals, and test the water one hour after drying.

Leakage Buster This product is a high-tech product, easy to use, just a spray, can quickly penetrate into the concrete, cement mortar inside, and combine with it into a waterproof layer, play a waterproof and impermeable role.

You have to check the cause of the leakage first, and then turn up the surrounding floor tiles from waterproofing, just simply fill the leakage for a long time or will it leak, to what extent? Where there is a leak, you have to figure out what materials to use before deciding what materials to use! Oil-based materials are used for the pipes, and cement-based materials are used for other places.

1. Grassroots treatment.

First of all, we carry out base treatment on the wall and ground of the bathroom, and level the wall and ground, especially the yin and yang corners and the curved parts of the pipes. If there are cracks in the wall, it needs to be repaired first to ensure that the entire wall is smooth and clean, and then before construction, you can sprinkle some water on the wall and ground to moisten the surface, but you can not leave open water.

2. Paint with waterproof coating.

Next, we first stirred the waterproof paint on the wall and began to paint the wall part. We need to paint the wall evenly first, and apply more waterproof paint to the corners of the wall and the pipe part, to ensure that the coating and the wall are completely bonded, and the height of the painting should be consistent. Wait until the waterproofing coating is dry, and then brush the waterproofing paint a second time according to the criss-cross method.

Finally, we stirred the waterproof paint on the ground and brushed the waterproof paint according to the steps above. Waterproof paint is generally brushed twice, if the waterproof requirements are high, you can brush it again.

3. Protective layer.

In order to prevent us from accidentally damaging the waterproof layer during construction. We can first lay a protective layer, the protective layer should be completely covered with the waterproof layer, and the base layer should be firmly combined, so as not to appear omissions, cracks, bubbles and other phenomena.

4. Closed water test.

After the waterproofing coating has dried, we can perform a 24-hour closed water test. You can make a threshold for the bathroom first, then block the drain and put about 2cm of water into the bathroom. Wait until 24 hours, go downstairs to the owner's house to observe whether there is a leak in the ceiling, if there is a leak, then you need to do it again.