-
Anonymous users2024-01-23Your toilet should be equipped with an infrared sensor switch! Under normal circumstances, the manual switch will not flush automatically, and it is recommended to ask someone to check whether there is a problem with the switch, especially the infrared switch in the public toilet always has such a problem.
-
Anonymous users2024-01-22The toilet flushometer automatically drains every once in a while because there is a problem with the setting, so check the infrared switch.
-
Anonymous users2024-01-21This one is very simple and automatically adjusts the water pressure to prevent water from spurting.
A kind of delay flushing valve made up of main body, floating valve and switching device, the switching device is made up of switch, positioning seat, pushing positioning pin and positioning sleeve, the front end face of switch is parallel to the rear end face of positioning seat, promoting positioning pin and positioning seat are fixedly connected as a whole, and promoting positioning pin is sliding connected with the push rod of floating body through the clamping groove. >>>More
The time-delay flushometer saves water and has low water pressure. >>>More
Left and right, as long as the braided hose is long enough to be connected to the toilet, the toilet is generally connected to only one cold water pipe, if you have a hot and cold two outlets, do not divide the left and right only to connect the cold water pipe, in case you mean that the right is the hot water pipe you want to connect it is not very good, a flush on the gas waste gas bill, in case of some hot water flushing toilet that smell who knows.
It can be sold in the building materials market or in the bathroom market.