-
Anonymous users2024-01-23Hello, the toilet can be installed, if there is coagulant around the toilet base, you need to wait for about 2 hours.
-
Anonymous users2024-01-22How long does it take for the toilet to be fixed in the bathroom
After about 24 hours, the glue at the junction with the ground is dry and ready to use, pay attention to keep the ground dry. Just press the glue with your hand and feel elastic and non-sticky.
-
Anonymous users2024-01-21After each use, the toilet brush should be flushed with water in time, then hung up, drained the water, or sprayed with some disinfectant (such as bar four disinfectant), and finally placed in a ventilated and dry place. Remember not to place toilet brushes with water in airtight containers or in dark, damp corners of the bathroom, which are most likely to harbor germs. Depending on the degree of use, the lifespan of the toilet brush is also different.
After the bristles fall off, it is easier to hide dirt and dirt, generally speaking, after about half a year of use, it is time to consider decommissioning.
After the bathroom is tiled, it is better to use it for a long time. >>>More
This question must be a long time as well. It depends on whether your bathroom is ventilated, if it is ventilated for two days. If you don't ventilate, it's best to wait a few more days. If you don't, it's a blank post.
The electric switch in the corridor should not be the main gate of your house, but only the opening of the bathroom socket circuit, otherwise your house will be completely out of power, right? The reason why your bathroom light is still on is because as mentioned above, this switch does not care about lighting, and ordinary ceiling lighting does not need leakage protection. >>>More
Yes, you can use it, remember that putty and latex paint should also be waterproof.
If the toilet socket cannot be used, you should find a professional electrician to measure it. If you have an electric pen or multimeter at home, you can measure it, the most basic is to have an electric pen, insert the electric pen into the jack to see if there is electricity, and see if the bathroom is empty and tripped. Or the wiring inside the socket is loose and falls off, resulting in no power.