-
Anonymous users2024-01-23Multiply the side length by the side length to calculate the area of each wall tile, and then multiply the total number to calculate the total area of the wall tile.
-
Anonymous users2024-01-22The perimeter of the floor in the kitchen X the height of the wall tiles. For example, the kitchen is a room of 2 meters by 2 meters, then the perimeter of the ground is 8 meters, if the wall tiles are meters high, then the wall area S = square, in view of this situation, the wall tiles will have cutting loss, and the budget will generally be 22 square meters.
-
Anonymous users2024-01-21The area of kitchen tiles is real, generally full of stickers is the perimeter multiplied by meters, the door and window holes are not reduced, there are chamfers or strips to be counted separately, according to the length of the meter, the waist line and the flower piece are also separately calculated.
-
Anonymous users2024-01-201. It depends on what specifications of bricks you use, and how it is typeset.
2. After confirming, here is an example: if your wall is wide * high, the bricks used are 300 * 600, (horizontal pasting method).
The vertical direction is exactly 8 blocks (2400 300 = 8).
Horizontal direction, 3200 600 = 5 pieces, there are 200 mm left, here is also a brick, that is, a row of calculations will cost 6 pieces, then a total of 6 * 8 = 48 bricks.
3. But just cut down 200mm, leaving 400mm, you can see if other walls can be used again, if you can, you can use it.
Note: If you simply calculate the area, that is, the perimeter of the kitchen * is higher than the area (minus the door opening), and the window can not be seen if it is not big, because the surrounding of the window is also tiled, which is probably equivalent to this area.
-
Anonymous users2024-01-19It is recommended to go to the major building materials markets.
-
Anonymous users2024-01-18It is recommended to go to the large building materials market to find out.
It is good-looking, and the balcony is well lit, and when the sun is fierce, gray contrasts with white to protect the eyes, forming a good soft coordination with the surrounding environment.
According to the provisions of the "Real Estate Surveying Code", the construction area of a fully enclosed balcony is calculated according to its peripheral horizontal projection area; The floor area of an unenclosed balcony is calculated at half of the horizontal projection area of its periphery. The closure method of the balcony shall be subject to the approved "Commercial Housing Planning and Design Drawing", and the developer shall not change it without authorization. When some sellers sell houses, the balcony is not closed, but when the building is handed over, the balcony is closed, and the buyer is charged the other half of the fee to be awarded a high price, which is an act in violation of the "Planning and Design Drawings of Commercial Housing" submitted for approval, and the buyer may not accept it. >>>More
"Ceilings are generally material costs + labor costs.
The materials include: keel, aluminum gusset or wood square, gypsum board. >>>More
Solid wood composite doors are also divided into many kinds, such as solid wood veneer, veneer, sticker, the material is different, the process is not the same, the price is different.
1. About the enclosed balcony. The so-called closed balcony is a balcony with glass or plastic steel windows. However, it must be a closed balcony with planning approval documents or construction drawings approved by the planning department to be fully counted. >>>More