-
Anonymous users2024-01-23Adhesion (draw a hundred grids with a knife), recoatability (the connection between the primer and the topcoat), the appearance of the paint film (smooth and smooth), hardness (measured with a Chinese pencil, the best hardness is above H or 2H), scratch resistance after drying, (after the topcoat is dry, there are hands or nails scratching the paint film, see if it will be scratched)...
-
Anonymous users2024-01-22There is also a guarantee when you buy a good brand of red apples and Dulux furniture paints are very good.
-
Anonymous users2024-01-211. Look at the surface finish of the paint. 2. Look at the paint to have clarity. 3. Look at the paint to resist scratches. 4. Paint desert thickness.
GB T 3325-2008 General Technical Conditions for Metal Furniture 1814KBGB T 3324-2008 General Technical Conditions for Wood Furniture 969KB to download it after searching on the Yiqi Standard Network. >>>More
There are two ways, the first is to use the polish to color after the primer is done, and then make the topcoat. The second is that after the primer is done, the topcoat is finely tuned.
Generally pneumatic. After you have mixed the paint, check the air pressure, connect the air pipe fitting, and pull the flight (below). Look at how much paint is applied and how much is atomized.
"1. Use sandpaper from coarse to fine sandpaper to polish the workpiece to obtain a smoother surface 2. Scrape the water-based wood putty on the workpiece in batches to obtain a better feel 3. Carry out bottom coloring treatment on the workpiece to get the desired color 4. The first time the brushing method is used to increase the penetration depth of the wood wax oil, and the construction speed is fast 5. The second time is wiped and painted, which can save the amount 6. After the second or last surface drying (about 1 hour in summer and about 2 hours in winter), it is dried immediately The net cotton cloth wipes the surface of the workpiece, can obtain a smooth effect 7, increase the number of times of wiping, and polish with fine sandpaper one by one, and finally adopt the mode of wiping after the thin wipe surface is dry, and the effect of high-end furniture can be obtained"
1. Fill the container with cold water, then add an appropriate amount of vinegar and put it in a ventilated room, and open the furniture door. In this way, it can not only evaporate the appropriate amount of water to protect the paint surface of the wall roof, but also absorb and eliminate the residual odor; >>>More