-
Anonymous users2024-01-23First of all, scrape the joints and uneven places of the furniture with putty and anti-crack treasure, and polish them with a grinder. The paint spraying room should be kept clean and dust-free, the painting equipment should be perfect, and the primer should be dried and polished with fine sandpaper. Spray the primer again, and after drying, spray the topcoat at least twice with the surface of the furniture smooth and flawless.
Note: Don't do it without spraying primer, and the sprayed furniture should never be dried in the sun.
-
Anonymous users2024-01-22Cover with black stockings to be uniform and delicate.
-
Anonymous users2024-01-211. Surface treatment.
Remove oil, glue, pine resin, dust and wood chips from the wood itself or during processing.
2. Embedded putty.
According to the sample or the color requirements of your own selection, shellac putty is prepared to fill in the defects such as nail holes, insect eyes, crevices, cracks, and freckles.
3. Scrub. Use sandpaper to smooth the putty and eliminate abrasive debris.
4. Wipe the old powder.
Erase the excess water powder, finish with shellac varnish, look at its color effect after drying, and the sample should be slightly lighter, because the color of the varnish will be darker, in addition, the color can also be adjusted with wine color, if the color is heavy, it is difficult to find color on the light color.
5. Brush shellac varnish.
After applying the old powder, brush a shellac varnish, the purpose of which is to fix the base color on the one hand, and on the other hand, the wood wool will stand up after painting to facilitate removal.
6. Scrub.
Grind off the wood hair and gouache, pay attention to grinding off the background color, do not expose the horns. Remove the sand and ash.
7. Shellac putty.
After brushing the shellac paint, you will clearly see the unevenness and defects of the coating film, and scrape the shellac putty of the same color as the base color.
8. Frosted and flattened shellac putty.
9. Brush the wine color.
When applying shellac paint, you will find the color difference between the paint film of the workpiece and the sample, and dissolve the required fuel in the shellac paint to make a wine color for color blending.
10. Color matching.
Observe the whole workpiece, focus on the color difference at the interface between the strip and the plate, and then add the required color in the shellac paint and apply it to the parts that need to be color-matched.
11. Finishing varnish.
When finishing the desktop, try not to use shellac paint as much as possible to sit on the base color and primer, because shellac paint is afraid of hot water. When applying the topcoat, it should be noted that the surface drying time is quite different, if the natural color furniture is painted or the color is very light, it is recommended to use dilute nitro clear instead of shellac paint as a primer.
-
Anonymous users2024-01-201.The place of painting should be in a professionally sealed paint booth.
2.The primer should be smooth and smooth, and try to use more than 400 sandpaper, so that there will be no sandpaper marks.
3.The ratio of paint must be mastered, and try to be dry and thin, (if it doesn't work, it will be slightly thinner to ensure that the leveling is good).
4.Technique, to achieve a uniform speed, uniform distance (the first few points are dead can not be changed, this depends on the individual, practice more spray).
5.Tips, the amount of gas is not too large, the amount of paint is not too large, the mist is slightly wider, walk the gun several times, it is best not to spray it with one or two shots...
6.I'm not a master, don't spray me when you see it, I hope you can add to the shortcomings.
7.In addition, the dust on your body should be blown clean before painting, and the dust on the goods should be blown clean, which is very important.
-
Anonymous users2024-01-19Good craftsmanship, good materials, and good construction conditions and equipment.
It mainly depends on the effect of the repair you need.
Normally, if you paint and repair: the effect of the repair must be different from your previous effect, and there are differences in flatness, gloss, and color; >>>More
Answer 1: Have a clear understanding of the product characteristics of the sofa, whether the skeleton is strong, filling materials, resilience, etc.; When customers buy, they can introduce and judge according to each customer's point of concern, which can not only solve the customer's problems but also make customers trust 2. Understand the after-sales service guarantee of the sofa sold (dispel customers' doubts about purchasing) 3. The price of the sofa, according to the customer's chat, judge the customer's affordability, and recommend the sofa that is suitable for the customer's affordability 4. 5. Be patient with customers, care more about the needs of customers, and solve customers' doubts
Because of the light color of white lacquer furniture, if it is not properly maintained, it is more likely to become old than other furniture, affecting its beauty, so it is especially important to be careful when maintaining white lacquer furniture. >>>More
Basic practices for furniture white paint:
Fill in the defects first, then polish the furniture again, then do a good job of hygiene, then apply two to three times of polyester transparent bottom or white primer, preferably white bottom, polish each time, and finally apply two to three times of polyester white topcoat. Every 1-2 sprays of paint, are required to be sanded once, sanding must be used water sandpaper, from 300 to 1000 gradually increased, should be dipped in a small amount of water when grinding. The surface should be cleaned after sanding. >>>More
First of all, it is necessary to understand the needs of customers, locate the standards of customers, and have strong judgment and affinity. Different groups of people have different coping methods, so it is necessary to summarize more. There's a set of tutorials that are really helpful at : >>>More