Can the old security door be changed to a new security door lock?

Updated on Security door 2024-01-27
7 answers
  1. Anonymous users2024-01-23

    There are the following factors that decide:

    The mounting holes of the new security door lock must be the same as the installation holes of the old security door lock to be interchangeable. It is necessary to look at the holes that have been opened in the door, and some holes may not be completely matched. Standard holes are easier to replace.

    For example, standard 6068 lock body, standard American Standard 87 lock body, etc.

    The door body of the old-fashioned security door, how is the old and new situation? If it is rusty or even out of place, there is no need to just change the lock, just change the door.

  2. Anonymous users2024-01-22

    Whether the old security door can be changed to a new security door lock is determined by the following factors:

    1. What is the condition of the old and new door body of the old-fashioned anti-theft door? If it is rusty or even out of place, there is no need to just change the lock, just change the door.

    2. The installation hole of the new anti-theft door lock must be consistent with the installation hole of the old anti-theft door lock in order to be interchangeable. If the mounting holes of the two are quite different, the old security door can not be modified with a new security door lock at all.

  3. Anonymous users2024-01-21

    Yes, but you should look at the holes that have been opened in the door, and some holes may not be completely matched. Standard holes are easier to replace. For example, standard 6068 lock body, standard American Standard 87 lock body, etc.

  4. Anonymous users2024-01-20

    Yes, this one needs to remove the lock, take a photo and measure the size, you can go to the lock store to buy it, and you can replace it yourself.

  5. Anonymous users2024-01-19

    It should be possible, specifically remove the lock body of the old anti-theft door, and then go to the lock body store to ask!

  6. Anonymous users2024-01-18

    Yes, whether it is a handle lock or a clear lock, you can call a full set, rest assured.

  7. Anonymous users2024-01-17

    Of course, you can find a locksmith and change the lock cylinder with a high insurance factor.

Related questions
Can the lock cylinder of the security door be installed with any security door
1 answers2024-01-27

Under normal circumstances, the lock cylinder indoor door side can be A B key universal, the outdoor door side B key can not be used after the A key is used, the principle is not much to say afraid of being used by someone with a heart, if it is reversed, there will be two consequences, first of all: the anti-theft effect will definitely be a little different, because there must be a change, but the difference is not big, as long as it is not a particularly simple bullet lock, the impact will not be too large, remember not to throw the A key casually, This mainly refers to some lock cylinders with better quality or better brands to do more responsibly; Another consequence is that there is no anti-theft measures on the side of the indoor door, so if it is installed in reverse, then the anti-theft performance will be greatly reduced, so it is necessary to pay attention to it, and the security of the lock is likely not to be replaced. This kind of is mainly some"Hearted"of businesses to save costs.

What to do if the old-fashioned stick anti-theft door lock is broken
2 answers2024-01-27

Abstract Hello, there will be a lock cylinder inside the door lock of each security door, if the lock of the security door is broken, and you don't want to replace the whole door, then you can use some tools to disassemble the lock, find the lock cylinder inside, that is, the one next to the deadbolt, that is, the lock cylinder, unscrew it, re-open a lock cylinder with similar specifications and replace it, and its price is not very expensive. >>>More

Is it safe for the old security door to automatically lock with a bang
1 answers2024-01-27

It's not safe, because it's the lock cylinder, and it has nothing to do with touching the lock.

Can the key of the anti-theft door lock be matched?
5 answers2024-01-27

The key of the cross-shaped lock cylinder can be matched, but the key of the S-shaped and M-shaped lock cylinder cannot be matched, but the lock cylinder can be changed. >>>More

Is the anti-theft door lock cylinder replaced by the anti-theft door lock cylinder universal?
3 answers2024-01-27

The size of the lock cylinder of the anti-theft door, if you have a strong hands-on ability, you can remove it and measure it, based on the distance between the middle screw hole and the two keyholes, of course, if you are troublesome, you can simply measure it, as shown in the figure below, you only need to measure L1 + L2. >>>More