How to build a toilet in a garage

It shouldn't be able to be built.

Generally, warehouses are lower than the road surface.

There are no sewers.

At most, there is a drainage ditch.

That's not pooping.

1.This one is simple.

2.Find a place close to the sewer, mainly thinking about the pumping and drainage system.

3.Just build one and use it for convenience.

2. According to the convenient and feasible sewage discharge interface, determine whether the gravity drainage or the power lifting drainage.

3. Make a drainage pipe and draw a water supply pipe.

4. Make the ground and wall and install sanitary appliances.

The sewers need to be changed, and nothing else.

Method: Find an experienced bricklayer master at the local labor market or an experienced master who is usually an all-rounder. First, design the direction of the defecation pipeline and the space division plan in the garage, and then construct according to the drawing.

Secondly, find the nearest sewage main (manure pit) from the garage, report to the community property (under normal circumstances, the management fee) agrees to excavate and construct, and use a diameter of 10-14cm PVC pipe to make the main sewage pipe.

Material: 8-10 bags of cement (2 walls, about 6 square meters of bathroom);

70 red bricks per square meter (5-inch wall);

2 tons of yellow sand; PVC pipe with a diameter of 5cm 2m (spare and basin and floor drain are connected with the main pipe;

PVC pipe with a diameter of 12cm (depending on the distance from the toilet to the septic tank of the community);

Bathroom walls and floor tiles (according to the area after molding);

squatting and making a toilet;

1 noodle pool (if required);

Faucets, switches, wires, cassettes, lamps (on demand).

If the above original garage area is large and the design is reasonable, the garage will not affect the release of the car after the change; If the original garage is small, it may not be possible to fit the car after the change.