-
Anonymous users2024-01-231. Handrails for the disabled should be set on both sides of ramps, stairs and steps exceeding the two poles and on the three sides of the elevator, and the handrails should be kept coherent.
2. The shape, specification and color of the handrail for the disabled should be easy to identify and grasp, the size of the cross-sectional surface of the handrail should be 35mm to 50mm, and the clearance between the inside of the handrail and the wall should be 40mm.
3. The handrails of ramps, stairs and steps should be extended horizontally at the starting and ending points.
4. Handrails for the disabled should be made of high-quality wood or other good materials, and the handrails must be installed firmly and should be able to bear the weight of the body.
5. The floor of the toilet should be flat, not smooth and not waterlogged, there should be no height difference, and a high coat hook should be set up in the toilet stall.
6. The diameter of the grab bar is 32mm to 40mm, and the inner side is 40mm away from the wall.
The general type is 1 point higher than the height of the toilet. >>>More
There are requirements for the width, at least the meters are still somewhat forgotten, and handrails and so on.
<> interior space is larger. In order to facilitate wheelchair access for people with disabilities, the width of the door of the toilet should be higher than 800mm, and it is recommended to use a sliding sliding door and install a horizontal handle on the door. If you still have the budget, the electric door is better, which can be opened or locked at the touch of a button. >>>More
There are standards for public toilets for the disabled, and the clear width of the door must not be less than meters. >>>More
Safety handrail, toilet handrail from the ground height 700mm, spacing width 700-800mm, urinal handrail from the ground 1180mm, basin handrail from the ground 850mm. >>>More