-
Anonymous users2024-01-23The inlet valve can be adjusted.
The specific steps are as follows:
1. As shown in the figure below, first screw the card of the inlet valve to the "OPEN" direction. Then pull the inlet valve body to make the inlet valve as a whole raise or lower. The lock and loosening of the card can be found in the logo of the water inlet pipe.
2. The water level of the water tank of the inlet valve is fine-tuned and adjusted, and the adjustment lever can make the water level of the water tank rise or lower (below). When the adjustment lever is rotated counterclockwise, the float box descends and the tank water level decreases. On the contrary, by rotating the adjustment lever clockwise, the floating box rises, and the water level of the tank rises.
-
Anonymous users2024-01-22The inlet valve can be adjusted.
1. As shown in the figure below, first screw the card of the inlet valve to the "OPEN" direction. Then pull the inlet valve body to make the inlet valve as a whole raise or lower. The lock and loosening of the card can be found in the logo of the water inlet pipe.
2. Fine-tune the water level of the water inlet valve and water tank.
The adjustment lever can be adjusted to raise or lower the water level of the tank (below). When the adjustment lever is rotated counterclockwise, the float box descends and the tank water level decreases. On the contrary, by rotating the adjustment lever clockwise, the floating box rises, and the water level of the tank rises.
-
Anonymous users2024-01-21How to adjust the toilet water level if it is too high, and stay away from the trouble of splashing water in the toilet.
-
Anonymous users2024-01-20This is because the position of the float in the tank is too low, causing the switch of the water valve to be open all the time, as long as the position of the float is turned high.
-
Anonymous users2024-01-19If it's old-fashioned, adjust the angle of the "drifter" inside, if it's new, I don't know.
-
Anonymous users2024-01-181. To open the toilet tank, let's see what level the scoop inside the water tank is at when it is full of water. If the water inside is full and the tank is still flooding, then there must be a leak coming out.
2. You can use water to pull the card position of the water scoop up and down to see the sensitivity of the water scoop, if it is not smooth, or it is difficult to move, then it is announced that the water scoop equipment has failed. Remember to press the ladle down a little bit, not too high.
3. Then remove the equipment of the water scoop and clean it, if you don't know how to disassemble it, just put dry water directly in the water tank, wash it with dish soap and washing powder. If you can do this, you can continue to use it, if not, you need to replace it.
>4. Check the interface of the stainless steel hose on the outside of the water tank and where the water tank is connected, and see if it is not tightened or the rubber pad inside is aging and causing water leakage. This must be ascertained. If the internal equipment is fine, then it is also necessary to check whether the toilet tank has cracked due to impact, and if there is an external force, this tank may also leak.
5. You can find the management office or find a hydropower master to help you deal with this kind of troublesome thing. If you want to buy a new toilet, it is also possible to ask the master who bought it to help install it.
How the toilet tank water level is regulated
1. Adjust the water inlet column.
First of all, turn off the inlet angle valve and drain the toilet to store water; Then use a wrench or other tool to twist the nut connection of the water inlet hose under the toilet; Then take out the water inlet column in the toilet bowl for mediation; Rotate the card of the water inlet column in the direction of "OPEN". Then pull the water inlet column to make the water inlet column as a whole raise or lower.
2. Adjust the adjustment rod.
When the adjustment lever is rotated counterclockwise, the float box descends and the tank water level decreases. Rotate the adjustment lever clockwise, the floating box rises, and the water level of the tank rises.
3. Adjustment of water supply pipe.
The make-up pipe is a thin leather pipe that connects one end to the inlet valve on the left side of the tank cover and the other end to the drain valve on the right. The next intake can be reduced by unplugging the make-up pipe inside the tank.
How to deal with a leaky toilet:
1.Check if the flush switch is reset. The plastic flush switch of some flush toilets will occasionally get stuck after being worn for a long time and cannot be restored. Generally, the switch can be reset by repeating it several times. >>>More
The initial decoration of the bathroom is very important, because the decoration at this time should take into account the problems of waterproof, odor prevention and so on. Many people find that soon after installing the toilet, it will smell, why? >>>More
A leak in the back of the toilet is usually due to a poor connection to the water pipes or a poorly sealed tank. If this happens in Koya, we need to fix it as soon as possible, otherwise a lot of water will be wasted, causing economic and environmental waste. Here are some workarounds: >>>More
1. First of all, open the water tank of the toilet bowl and see what level the scoop inside the water tank is at when it is full. If the water inside is full and the tank is still flooding, then there must be a leak coming out. >>>More
Toilet tank accessories leakage, first check yourself to see where the problem is, find it easy to do, go buy accessories yourself, come back to replace it and solve it; If you can't find out what the cause is, ask a professional master to repair it, and it will be done quickly, don't worry.