-
Anonymous users2024-01-231. Drop into clean water when the power is on, this situation generally does not need to be disassembled.
1 Power off as soon as possible.
2 Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.
3 Place under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry.
After these three steps of processing, the power supply can basically work normally.
2. Drop into non-corrosive liquid in the case of power failure. In this case, it can be assumed that the machine is not damaged. But maybe the LCD screen will be more ugly.
1 Shake dry vigorously, but don't shake the machine off.
2 If there is no trace on the LCD screen, treat it according to Article 3 of the first point.
3 If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.
3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not.
This situation is the most troublesome. However, there is also a good chance that the machine will recover after proper treatment.
1 Power off as soon as possible.
2 If it falls into corrosive liquid (e.g. seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.
3 Disassemble the machine as soon as possible. But take your time when disassembling the machine.
4 Clean with alcohol or professional washing water.
5 Assemble. Or take the whole pile of what you took apart and hand it over to the repair point. Let the repair point clean and assemble it again for you.
Use a hair dryer to dry your phone immediately, and if it doesn't work, fix it right away.
Blow hard with a hair dryer, don't turn it on. Take a look for three or four days, and if it really doesn't work, go to customer service. Anyway, I just bought a mobile phone for a week and it also fell into the toilet ==
Now there are many mobile phone repair shops have a mobile phone fragrance business, you can try it, and, the mobile phone must not be turned on when it is water, first take it to the repair shop to see, the water inlet machine is not guaranteed after sale, the maintenance cost is very high, and the general mobile phone repair shop can be.
The mobile phone must be a lot of sewage in the toilet mobile phone, it should not be turned on immediately, the water in the mobile phone is easy to be damaged, first of all, the mobile phone battery should be removed, with a dry cloth, paper towels, etc., some watery places are moderately wiped, and then you can use a hair dryer to blow moderately on the mobile phone where there is water, so that the water evaporates quickly, and finally put the mobile phone for a period of time, feel that the moisture is almost there, and then put the battery to try, If not, you can only send it to a repair shop for repair
There is a high probability that it burned out.
The phone fell into the water and picked it up and dismantled the battery as soon as possible, otherwise it would be short-circuited and burned out, and then dried with a hot hair dryer, don't be in a hurry to install the battery, because the hair dryer inside the mobile phone can't blow. >>>More