-
Anonymous users2024-01-23This shouldn't be the case.
The combination of the cabinet countertop and the tile wall should have a waterproof edge of about 5 cm height, which is processed with the same material as the countertop.
Due to the error of flatness, the tile will definitely not be able to achieve absolute flatness. The waterproof edge can cover up gaps due to gaps, and can also add a barrier to prevent water and stains from seeping into the cabinet.
Since there is no waterproof edge, it can only be sealed with glass glue that is close to the color of the tile or close to the color of the countertop.
Silicone neutral anti-mildew glue should be used for glass glue. To see the hose outside the labeling, it is best to have, no shrinkage cracking, words. The higher the net price, the better.
Do not use acidic glass glue, the oxidation resistance is relatively poor, and it is easy to change color and crack.
A: Water enough water in the crevices first. 1 with cement and fine sand >>>More
Use glass glue to fill the coronade.
There is a gap between the kitchen sink and the countertop, which can be solved with glass glue, buy a tube of glass glue, and then apply it to the gap, wait for about 24 hours, do not use and mess with the sink in the middle, and use it after the glass glue solidifies. It is important to note that users must blow dry the surrounding moisture before applying. Polyurethane sealants can also be used, which are weather-resistant and have a long service life. >>>More
Custom furniture is factory manufacturing, on-site assembly, and the existence of gaps in the wall is a common phenomenon, many custom furniture has such a question, the. >>>More
There is a decorative clasp cover that conceals the gaps. Playing glass glue is also a solution, which is not as good as the decorative buckle cover.
Water vapor or oil contamination will enter.
In addition, if the gap is too large, the corner line will fall off if it does not fall off. >>>More