What are the installation methods of spotlights in the living room, and how to install the spotlight

First, the process flow:

Lamp stand and lamp installation Docking and offline test lights.

2. Installation of lamp stands and lamps:

1. Measure the installation height of the lamp (lamp stand) according to the design requirements, and mark the pole.

2. Hang the lamp stand and lamps on the pole (heavier lamp stands and lamps can be hung on the pole with pulleys and large ropes), wear hoops or bolts, find the illumination angle according to the design requirements, and fasten the lamp frame after finding the levelness.

3. The elevation angle of the lamps installed in rows should be consistent and neatly arranged.

3. Match the down wire: fix the pin insulator on the lamp stand, tie one end of the wire on the insulator and turn it back, and connect it with the lamp head wire and fuse respectively. Half of the rubber cloth and black tape are overlapped, and each layer is bandaged.

Then, the other end of the wire is tightened and wound with the back buckle of the street lamp trunk.

4. The phase wire of the lamp should be equipped with a fuse, and the phase wire should be connected to the center terminal of the screw lamphead.

5. The connection point between the line and the street lamp trunk line should be 400 600mm from the center of the pole, and the symmetry on both sides should be consistent.

6. There should be no joint in the volley section of the down lead, and the length should not exceed 4m, and a fixed point or steel pipe lead should be installed when exceeded.

7. Soft plastic pipes should be set at the place where the wire enters and exits the lamp stand, and a waterproof bend should be made.

8. Test lamp: After all the installation work is completed, send power, test the lamp, and further adjust the illumination angle of the lamp.

1. The specific location of the spotlight in the living room.

When installing living room lights, the living room is the most widespread type of lamp. Among them, the living room installation spotlight, it is only a kind of basic lighting, its main function is not in the lighting, it can play a role in rendering the atmosphere, it is generally not recommended to install in the center of the living room, because it is a rendering place, the installation of the living room is mainly used for lighting, you can choose to install it around the ceiling, install it next to it, and also keep a certain distance. When installing spotlights, it is also necessary to take into account its practicability, a more commonly used position can be placed on the TV, and the effect is better.

2. The brand of spotlights.

When installing spotlights, it is also necessary to pay attention to its branding, because the brand is different, its quality may be different, Philips lighting as one of the top ten brands in China, since its establishment, has been focusing on the development of technology, to provide consumers with a better way to use, when buying can choose this one. At the same time, you can also choose Opple lighting shareholders are also the top ten domestic lighting brands, its after-sales service is relatively good, to solve some problems after sales, its types are also relatively rich, the quality is also relatively good, you can also choose Opple lighting fixtures.

3. Steps to install the living room lamp.

Before installing the spotlights, it is necessary to check, first of all, check out the quality problems of its products, if it is not a human reason, it should be replaced in time, and then the next thing is to check whether its lights are complete, the main thing to note is that before installing the spotlights, the power supply should be turned off, if you need to use electricity, there may be some dangers, so you should pay attention to these problems when installing, if it is a relatively large spotlight, you can ask a professional decoration team to install, If it's small, you can try it yourself.