What are the kitchen sink installation preparations

When installing any product, then you need to make prerequisites, so that you can be fully prepared for installation. We must also make sufficient preparations before the installation of stainless steel washing basins, so that we can complete the installation of washing basins in the shortest possible time. So first, open the package, take out the sink and drainage components, check whether the accessories are correct and complete, and then take out the washing basin, and follow the opening template attached to the packaging box to open the countertop.

Check whether the silencing block has degumming, if so, please re-paste, and then check whether the parts of the faucet are cracked, whether the sealing rings at both ends of the connecting pipe are missing, misaligned, damaged, etc., so as to avoid water leakage after installation. That is, the installation of the washing basin is carried out a few days before the decoration is almost completed, mainly to avoid some damage after installation.

Kitchen sink installation tips:

1. The drain of the vegetable washing basin must be left in the vegetable washing basin cabinet, and the angle valve should be installed before installing the vegetable washing basin. In order to avoid damaging the outer surface of the faucet during the installation of the faucet, the faucet cover or the faucet plastic bag should be put on the faucet for the installation of the faucet;

2. When connecting the hot and cold water pipes, facing the faucet, the left end is connected with the hot water pipeline, and the right end is connected with the cold water pipeline;

3. When installing bellows and braided pipes, we must pay attention to the size of the tightening force, too large is easy to damage the thread, too small may leak because of the seal;

4. After the installation is completed, do the water debugging of the stainless steel washing basin.