-
Anonymous users2024-01-23Glue neutral glass glue or fix it with lens nails, you will know when you go to the glass shop and ask.
-
Anonymous users2024-01-22You buy a mirror with 4 eyes, put it in the position where you want to install it, use the pen number to come out, and use a percussion drill to drill the hole 4 6 mm drill bit to expand the tube, and it's done.
-
Anonymous users2024-01-21Use an electric hammer to make a small hole for 6 points, then hit a wooden bolt, nail a nail, and then there are two foam stickers under the mirror, stick them to the wall, of course, if some mirrors are large, you have to make two holes in the wall, if you want to make two holes, you have to use a tape measure to measure the distance between the two mouths on the back of the mirror, and then draw it on the wall and then make a hole.
-
Anonymous users2024-01-20Adhesive installation: first stick the back of the waterproof mirror with transparent tape, and then paste it with glass glue, and seal it with glass glue around it, so as to prevent the glass glue from chemical reaction with the mercury of the waterproof mirror, and seal the surrounding of the mirror so that the back of the mirror is not from the entry of dirt;
Hanging: Drill holes in the mirror with a glass drill, drill holes with a pistol on the installed wall, put in a plastic expansion tube, fix the decorative cap with glass nails, and seal it with glass glue around it.
-
Anonymous users2024-01-19If there is a fixed hole in the mirror, first put the mirror in the position where it is to be installed, draw a mark on the hole, use an electric drill to drill the hole, stuff the wooden strip in the eye, and then screw the mirror to the wooden strip.
-
Anonymous users2024-01-181.Small pieces of mirrors can be glued to the tiles with neutral glass glue.
2.Large mirrors are installed with decorative nails (first with a drillstone punched in the tile, then with a plastic tie, and finally installed).
3.Paste a special pendant on the back of the mirror and hang it. (The method of installing hooks on the wall is the same as above).
-
Anonymous users2024-01-17Press 2 screws on the wall and hang it up again.
No, just hit the four corner nails.
The mirror itself is elastic, and the gap between the mirror and the wall will not cause the mirror to break easily. >>>More
Mirror shape.
When decorating a mirror in the bathroom, in general, it is most appropriate to choose a square mirror, because square items represent balance and order. Therefore, be careful not to use mirrors with sharp edges and corners, if a square mirror is paired with a round sink with the right lighting, it will be balanced in feng shui. In addition, both round and oval mirrors can be used, as long as there are no diamond-shaped mirrors or polygonal mirrors. >>>More
You can make a mirror cabinet and adjust it to a 45-degree mirror.
It will make the couple get into the horns when dealing with things, and the male sexual function in the family will be weakened, and the woman will be more susceptible to women's diseases. Regarding mirrors, if you must install a mirror in that position, it is best to install an angled mirror (the kind of mirror that is at a 30-degree angle to the wall and bows your head slightly).