How to deal with a leaky toilet tank?

There is a rubber buckle bowl in the water tank, and the water is to pull it up, and the water will automatically fall down and fill the water after the water is released. Rely on the pressure of the water to press this buckle bowl on the water outlet so that it does not come out of the water. This phenomenon is probably due to the problem of buttoning the bowl.

One is that there is a problem with the buckle bowl, which is uneven or wrinkled, and the other is that the ceramic at the outlet is uneven, resulting in a gap in the buckle. Check it out for yourself!

It will stop automatically, so how can I get water into it? Don't see what you mean?

1. Open the water tank of the toilet to see what kind of horizontal line the water scoop in the water tank is, if the water in the width of the water tank is full, but the water tank is still flooding, it means that the water tank is indeed leaking.

2. You can pull the card position of the water scoop up and down by hand to observe the sensitivity of the water scoop, if it is not smooth or difficult to move, it means that there is a problem with the water scoop.

3. It is recommended to remove the water scoop and clean it, if you don't know how to disassemble it, just put the water in the water tank and clean it with dish soap. If it still doesn't work after cleaning like this, you can only replace it.

4. There is also a situation that the rubber pad at the interface of the stainless steel hose at the water tank position is aging and causes the leakage of the trouser belt finger, or the leakage of the water distribution caused by the lack of tightening, which needs to be checked clearly.

5. If there is nothing wrong with the equipment in the water tank, then it is recommended to check whether the water tank of the toilet is cracked, and the water tank will also leak if it cracks.