What are the steps of painting wooden furniture?

Solid wood furniture painting method steps:

The first step is to remove the handle and other decorations, in order to prevent the handle and other accessories from being stained with paint, the handle and other decorations on the furniture should be removed before painting, in addition to preventing scratching the hand, it is more conducive to the uniform painting after removal.

The second step, sanding, before painting, the furniture should be polished, and there are the following steps for polishing.

1. Use coarse sandpaper to polish all the places that need to be painted, pay attention to the corners not to polish too much, and maintain the original shape of the furniture.

2. Dip a cloth in water, make it semi-wet, and wipe the powder on the freshly polished furniture.

3. Take the fine sandpaper and re-polish it, paying attention to the corners.

4. Clean up the powder with a water-soaked cloth.

This part is very important so that the furniture is painted stronger.

The third step is to paint the paint. There are also preparations for painting, 1. Take paint, brush, and open the paint cover.

2. Dip the brush in the paint bucket, don't get too much paint at a time.

3. The rules of painting are from top to bottom, from left to right.

4. Pay attention to the corners and hidden places should also be painted.

The fourth step is to dry. Leave the painted furniture for four to five hours until the paint is dry. During the drying process, care needs to be taken not to let other things come into contact with the undried paint, so as not to damage the paint surface that has just been painted.

The fifth step is to polish again. Once the paint is dry, use fine sandpaper to sand the furniture again from start to finish. This time the purpose of grinding is to smooth out the uneven parts of the paint, which is conducive to continuing to paint later.

Step 6: Paint the second time. Follow the third step above to paint for the second time. Note that if the paint is too thick, you can add an appropriate amount of rubber water, dilute the paint before brushing. Then continue to dry and sand.

Step 7: Paint the third time. Follow the steps above to paint again, so that the furniture is finished.

The eighth step is to install the handles and other decorations. Attach the decorations that were removed from the first step, such as the handle.

There are many steps in the whole painting process, and each step needs to be done carefully, so that the effect of painting is the best.

Spray paint of wooden furniture in the production process is actually relatively simple, the general wood material is actually sprayed on one layer, if the furniture may have to spray two layers in this way, the process of the whole coating line is roughly: upper piece - spray primer - leveling - curing - cooling - spray paint - leveling - curing - cooling - next piece. There is no pre-treatment requirement, and you can spray it directly when you come up.

During the drying process, care needs to be taken not to let other things come into contact with the undried paint, so as not to damage the paint surface that has just been painted. x0d x0a step 5, then polish. Once the paint is dry, use fine sandpaper to sand the furniture again from start to finish.

This time the purpose of grinding is to smooth out the uneven parts of the paint, which is conducive to continuing to paint later. x0d x0a step 6, paint the second time. Follow the third step above to paint for the second time.

Note that if the paint is too thick, you can add an appropriate amount of rubber water, dilute the paint before brushing. Then continue to dry and sand. x0d x0a step 7, paint the third time.

Follow the steps above to paint again, so that the furniture is finished. x0d x0a step 8, install handles and other decorations. Attach the decorations that were removed from the first step, such as the handle.

There are many steps in the whole painting of X0D X0A, and each step needs to be done carefully, so that the effect of brushing is the best.

The first step is to remove the handle and other decorations, in order to prevent the handle and other accessories from being stained with paint, the handle and other decorations on the furniture should be removed before painting, in addition to preventing scratching the hand, it is more conducive to the uniform painting after removal.

The second step, sanding, before painting, the furniture should be polished, and there are the following steps for polishing.

1. Use coarse sandpaper to polish all the places that need to be painted, pay attention to the corners not to polish too much, and maintain the original shape of the furniture.

2. Dip a cloth in water, make it semi-wet, and wipe the powder on the freshly polished furniture.

3. Take the fine sandpaper and re-polish it, paying attention to the corners.

4. Clean up the powder with a water-soaked cloth.

This part is very important so that the furniture is painted stronger.

The third step is to paint the paint. There are also preparations for painting, 1. Take paint, brush, and open the paint cover.

2. Dip the brush in the paint bucket, don't get too much paint at a time.

3. The rules of painting are from top to bottom, from left to right.

4. Pay attention to the corners and hidden places should also be painted.

The fourth step is to dry. Leave the painted furniture for four to five hours until the paint is dry. During the drying process, care needs to be taken not to let other things come into contact with the undried paint, so as not to damage the paint surface that has just been painted.

The fifth step is to polish again. Once the paint is dry, use fine sandpaper to sand the furniture again from start to finish. This time the purpose of grinding is to smooth out the uneven parts of the paint, which is conducive to continuing to paint later.

Step 6: Paint the second time. Follow the third step above to paint for the second time. Note that if the paint is too thick, you can add an appropriate amount of rubber water, dilute the paint before brushing. Then continue to dry and sand.

Step 7: Paint the third time. Follow the steps above to paint again, so that the furniture is finished.

The eighth step is to install the handles and other decorations. Attach the decorations that were removed from the first step, such as the handle.

There are many steps in the whole painting process, and each step needs to be done carefully, so that the effect of painting is the best.

The first step of wooden furniture painting is the destruction of the substrate, this step has the best effect in the process of furniture painting, and it is also the most important step of concealment, that is to say, the process of "substrate destruction" is used to imitate the traces left by insects, bumps, damage, wind erosion, etc., in order to achieve the effect of covering the surface defects of furniture.

After the destruction of the substrate is completed, the next step is to process the material, this is because the wood raw material itself will have a color gap, so it is necessary to repair the color according to the situation to ensure that the tone of the wood is basically the same, and the overall coloring of the furniture can be done after the material is processed, this step is to use alcohol-based colorants, lint-free colorants, oil-based colorants, dye colorants, etc. to color the background color of the furniture, so that the color of the furniture is more symmetrical.

After the base color is colored, the required pigment is added to the wood wool filler in order to increase the sharpness of the natural grain of the wood, pay attention to the uniform application, so as to achieve the two effects of coloring and filling, after this step is completed, you can use the first primer to achieve the effect of "continuation", but in order to prevent the texture of the furniture surface from becoming darker, it is necessary to use Grace clarifier to evenly brush before using the colorant, so that the tone of the furniture is more uniform.

The last step of the painting process is to carry out a second primer, which is mainly to protect the colorant used on it, and to achieve the effect of enhancing the thickness of the paint film, to ensure that the surface of the furniture is smooth and flat, so that good-looking furniture is born.

Hello, this is a commonly used paint construction process for furniture, you can refer to the next step, embedded putty sanding.

1. Insert putty, and use it back to fill in the nail holes, insect answer eyes, gaps, cracks and other defects. Use coarse sandpaper to polish all the areas that need to be painted, pay attention to the corners not to polish too much, and keep the original shape of the furniture.

2. Dip a cloth in water, make it semi-wet, and wipe the powder on the freshly polished furniture.

3. Take the fine sandpaper and re-polish it, paying attention to the corners.

4. Clean up the powder with a water-soaked cloth.

This step is important so that the furniture is painted stronger.

The second step is to paint the paint.

1. Take the paint and brush, and open the paint cover.

2. Dip the brush in the paint bucket, don't get too much paint at a time.

3. The rules of painting are from top to bottom, from left to right.

4. Pay attention to the corners and hidden places should also be painted.

Step 3: Allow to dry.

Leave the painted furniture for four to five hours until the paint is dry.

Step 4: Re-polishing.

Once the paint is dry, use fine sandpaper to sand the furniture again from start to finish.

This time the purpose of grinding is to smooth out the uneven parts of the paint, which is conducive to continuing to paint later.

Step 5: Paint the second time.

Follow the second step above for a second coat of paint.

Note that if the paint is too thick, you can add an appropriate amount of rubber water, dilute the paint before brushing. Then continue to dry and sand.

Step 6: Paint the third time.

Follow the steps above to paint again, so that the furniture is finished.

In this way, the whole furniture is painted.

In fact, the spray paint of wooden bai furniture in the production process is relatively simple, and the general dao wood material is actually sprayed on one layer, if the furniture may have to spray two layers, the process of the whole coating line is roughly: upper piece - spray primer - leveling - curing - cooling - spray paint - leveling - curing - cooling - next piece. There is no pre-treatment requirement, and you can spray it directly when you come up.