-
Anonymous users2024-01-23The sound of running water in the household toilet is what causes it to share together.
-
Anonymous users2024-01-22There is a popping sound when water enters the toilet, and there is no water when you press the flush button, and most likely there is a swag impurity blocking the filter at the entrance of the inlet valve.
The solution to the repair is simple:
Turn off the angle valve, remove the hose, and remove the inlet valve.
Turn it over and look at the filter inside the inlet pipe, take it out, clean it, and put it back on.
Summary. Hello is happy to answer your questions, it may be that the toilet tank has not reached that pressure for a while when the water is on, so a small amount of water leaks from the tank into the toilet. >>>More
The initial decoration of the bathroom is very important, because the decoration at this time should take into account the problems of waterproof, odor prevention and so on. Many people find that soon after installing the toilet, it will smell, why? >>>More
A small amount of water will accumulate in the pipe after using the faucet or shower, and then it will continue to drip after a while. So there is the sound of water.
The common reason for the leakage of the flush toilet is that the hemispherical rubber cover that covers the drain is lighter, and the water leaks due to insufficient gravity after the water tank is discharged, and it is not tight enough when it falls, and it often needs to be repeated to cover it tightly. The way to deal with it is to bundle a little heavy object on the connecting rod connecting the rubber cover, such as a large nut, toothpaste skin, etc., pay attention to the bundle as close as possible to the rubber cover, so that the rubber cover is easy to cover the drain and the leakage problem will be dealt with.
Because it is a water-saving toilet, press more and more, press less and use less, and use it in large and urinated.