-
Anonymous users2024-01-23Installation procedure for wooden doors and door casings:
1. Prepare tools: hammers, rulers, wooden (brick) blocks, ropes, pencils, Matson door covers, special sturdy connectors, etc.
2. Remove the plaster: Before installation, remove the old powder or lime at the place where the wooden bricks need to be installed, and leave the original brick wall or concrete wall.
3. Sleeve plate combination: Place the sleeve plate on the ground, fix it with special connectors, then pull the vertical line to correct the size, and fix it with a triangular correction through-angle bracket.
4. Vertical sleeve board: Before standing the sleeve board, the wall and the inside of the sleeve board at the wooden brick place must be coated with special glue, and then the sleeve board should be put into the door opening and the position and verticality should be corrected.
5. Place the wooden bricks: coat the wooden bricks with special glue, pad the position of the sleeve board and the wall, and fix the wooden bricks and the sleeve board with small nails.
6. Install the door edge: After the styrofoam is cured (generally 2-3 hours), dismantle the triangle bracket on the sleeve board, blank the actual door edge line size, coat the sleeve groove with special glue, and then gently knock and fix the door edge line and the door sleeve board. (If the door edge line and the groove fit loosely, you can use the inside of the door edge line to plug tightly).
7. Install the door leaf. Installation procedure for solid wood doors and door casings:
1. Prepare tools: hammers, rulers, wooden (brick) blocks, ropes, pencils, Matson door covers, special sturdy connectors, etc.
2. Remove the plaster: Before installation, remove the old powder or lime at the place where the wooden bricks need to be installed, and leave the original brick wall or concrete wall.
3. Sleeve plate combination: Place the sleeve plate on the ground, fix it with special connectors, then pull the vertical line to correct the size, and fix it with a triangular correction through-angle bracket.
4. Vertical sleeve board: Before standing the sleeve board, the wall and the inside of the sleeve board at the wooden brick place must be coated with special glue, and then the sleeve board should be put into the door opening and the position and verticality should be corrected.
5. Place the wooden bricks: coat the wooden bricks with special glue, pad the position of the sleeve board and the wall, and fix the wooden bricks and the sleeve board with small nails.
6. Install the door edge: After the styrofoam is cured (generally 2-3 hours), dismantle the triangle bracket on the sleeve board, blank the actual door edge line size, coat the sleeve groove with special glue, and then gently knock and fix the door edge line and the door sleeve board. (If the door edge line and the groove fit loosely, you can use the inside of the door edge line to plug tightly).
7. Install the door leaf.
The door is the door of the house, the installation effect and quality of the wooden door are related to the normal life of daily life, if there is a mistake in the installation, it takes time to reinstall, which will affect the normal life. >>>More
1 2 3 Upper edge of the door 1 mm Door vertical seam 2 mm Bottom edge of the door 3 mm.
There is no such hard and fast rule for the building and the country, but the effect of opening and closing the slot and then installing the hinge will be better.
What is the quality of solid wood doors, many people do not know where to start when choosing solid wood doors, one is not to know the material of solid wood doors, and the other is not to know what details are reflected in the quality of solid wood doors. Many people choose solid wood doors when they just feel that the solid wood doors look good when they buy them, but they soon find that the solid wood doors are deformed. Therefore, the quality of a good solid wood door is standard. >>>More
First determine the height and width of the door, then look at the thickness of the door cover, and then drill holes in the door wall, set the point, and use the level to locate the ......