-
Anonymous users2024-01-231.The sheet metal shaping is completed and cleaned. Wash with soap and water, then wipe dry.
2.Wax removal treatment. Wipe with dewaxing agent and cleaning cloth and wipe dry.
3.Peeling and polishing of old paint. Sandblasting, paint stripping, sandpaper grinding and paint stripping.
4.Make feather trim interfaces. Sandpaper wet or dry grinding.
5.Degreasing detergent. Wipe with degreasing detergent and cleaning cloth and wipe dry.
6.Sheet metal putty construction grinding. Wet or dry grind with polyester putty, 180 -240 sandpaper.
7.Degreasing detergent. Wipe with degreasing detergent and cleaning cloth and wipe dry.
8.Surface putty construction grinding. Wet or dry grind with polyester putty, 240 -320 sandpaper.
9.Anti-rust and corrosion primer construction. Spray primer.
10.Primer grinding. 400 -480 sandpaper wet grinding.
11.Topical anti-coating stickers. Paste masking paper.
12.Degreasing detergent. Wipe with degreasing detergent and cleaning cloth and wipe dry.
13.Medium coating leveling primer construction and grinding. Spray primer.
14.Fine seed (eyefill ash) construction and grinding. 800 -1000 sandpaper grinding.
15.Degreasing detergent. Wipe with degreasing detergent and cleaning cloth and wipe dry.
16.Leveling primer or sealing primer application. Spray primer.
17.Primer or old lacquer grinding. 1000 -1200 sandpaper grinding.
18.Anti-smear stickers. Adhesive tape and cover.
19.Dust-proof, degreasing treatment. Degreaser treatment.
20.Topcoat construction, one way to do it. Spray the topcoat.
21.Pigment varnish varnish, two-pass method construction. Spray topcoat and overfinish.
22.Roast. Oven heating.
23.Paint finish. Grinding, coarse wax, polishing, hand wax. --This is the difference between the principal spray paint and the regular few sentences.
-
Anonymous users2024-01-22The principle is the same, but it is also completely different, the car side is more profitable, and the school is well-equipped, so it is easy and safe to learn.
Yes, the principle is basically the same, the difference is not big, the car paint is three layers, primer, topcoat. Lacquer.
The specific painting process of panel furniture should be: first polish, then the uneven low with holes is repeatedly leveled with batch ash, and then after drying, it is sanded. After sanding, I look at the holes, I am doing a spot batch, and then I am sanding and applying the primer. After the primer is dried, polish and then apply 2 primers, spray 2 primers twice, and then polish after drying, and then spray the topcoat, and then apply the varnish twice after the topcoat is evenly applied, and then put it in the cool paint room and wait for the polishing after drying, and then it can be done after waxing.
Spray painting is to coat the surface of furniture with solid wood or solid wood veneer, and paint-free is to paste chemical skin on the surface of furniture without painting.
Hello, as the name suggests, although "baking paint" and "spray paint" may use the same spraying process, but the conditions for paint drying are different, and "baking paint" requires a relatively high temperature to dry in a special assembly line. Spray paint drying includes natural drying, so baking is more important than spraying, and the quality is easier to guarantee.
Not counting the coloring, it is three bottoms and two sides.