What to pay attention to in the installation of interior doors

Interior doors are one of the most common categories in modern home décor. It has very good visuals due to its set of attributes and has become mainstream for next-door installations. So, how to install interior doors? Let's take a look at how to install the door and its precautions.

How to install the door? It's not difficult, look below:

1. Clean up the site. Clean the construction site before installation.

2. Install the door frame. Divide the sides of the door frame into the center of the door hole and fill the gap between the door frame and the door hole with wood chips. THEN CHOOSE 4 FIXING POINTS WITH A FLOOR-TO-DOOR HEIGHT OF 10MM AS STANDARD, THEN INSTALL THE HINGED SIDE PANELS WITH A HAMMER TO ALIGN THE VERTICAL POSITION TO SECURE THE DOOR FRAME.

3. Install the door leaf. When assembling the hinges on the door leaf, pay attention to the flatness of the door leaf and the door frame (this position should be reserved before construction) and install the door frame on the door frame.

4. Installation line. When installing the production line, we cut the production line to 45° according to the size of the door frame. The horizontal and vertical lines are fixed with 502 glue, glued at 90°, and finally nailed to the door frame and covered with nail bars.

5. Install locking. First, use a pencil to draw the holes and the location of the holes in the door and frame. The depth of the hole depends on the length of the set screw.

After the aperture base is completed, the doorknob can be fixed at the height of the door panel; When the doorknob is fixed, the keyhole locks on the door frame, and the depth depends on the cylinder; Both must be kept at the same level. This way the door can be opened smoothly.

6. Inspection. Once the entire installation is complete, it's time to start the final tail check. In particular, the flatness of the door frame, whether it will be lifted, whether there is a bulge, etc.

The above is the introduction of how to install the door, in fact, it is not so difficult.

How to install interior doors, and precautions for interior door installation? First of all, try to avoid scratches or collisions when transporting. When placed, it must be placed on a level ground that does not receive direct sunlight but has air circulation.

Remember to place the door frame diagonally, so it is easy to damage the door frame and door leaf.

Then, when installing the door frame, be sure to adjust the verticality of the door frame to avoid damage to the door frame due to the drying and expansion of the blowing agent during use.

The above is all the knowledge about how to install interior doors and precautions for interior door installation. Although it is only to install the door, the door is to protect the safety of the occupants, so regardless of the product, the quality or installation must be careful.

1. When handling the solid wood door panel, try to avoid scratching or damaging the door frame and door leaf, and place the door frame door leaf smoothly on the indoor horizontal ground that is not exposed to direct sunlight but has air circulation. Remember to place the door frame and door leaf diagonally, which is easy to damage the door frame and door leaf.