How to wire the integrated ceiling plant

I am a business that does integrated ceilings, and I often come into contact with this kind of electrical appliances, although I am not an expert, but I know a little about it. Generally, when buying a bath bomb, the merchant will have a professional person to install the wiring for you, otherwise, if it is connected to the wrong wire, it is easy to damage the bath bomb, the new bath bomb is not moving the test line, the electrician will understand at a glance that if the installation line is removed, you can see the line diagram is not titanium, you have to try the line of the lighting ventilation one by one, the specific connection is like this, you must make sure that the bath bomb has a zero line, and the zero line of the bath bomb is much simpler. If the switch is connected, the corresponding wire will be connected to the switch control line, and if there are four bath bombs on the heating lighting heating block control, and the preset line is only three, then the ventilation and lighting can be connected to a line at the same time, remember that no matter how complex the bath bomb is generally only one zero line is used together, the other is the live wire that controls other functions separately, as long as the zero line is determined, the other lines can be debugged to pick up the corresponding can be, I hope what I said will help you, If you can't, contact me again.

1. Make preparations for the installation of bath bombs. After the ceiling work of PVC in the bathroom at home is done, the ventilation pipe of the general ventilation window needs to be about 1.5 meters, and the center of the installation position of the bath bomb should be paid attention to when installing, so the distance between the ventilation holes should not exceed 1.3 meters.

2. Determine the installation location of the bath bomb: the installation position of the bath bomb should be directly above the bathtub or shower room, so the ceiling of the bathroom should use materials with good strength in the use of the ceiling, and after the installation of the bath bomb, ensure that the height difference between the bath bomb bulb and the ground is between 2.1 and 2.3 meters.

3. Bath bomb installation process: preparation for ceiling installation - remove the mask (unscrew the bulb and take off the spring from the ring of the mask to remove the mask) - wiring (connect the bath bomb and the switch panel with a soft wire) - connect the ventilation pipe - push the box into the air hole - fix the bath bomb lamp - install the mask.

Depending on what kind of bath bomb you are, if the general heating bath bomb has two lines, if there is a fan, there are three lines, SY20050712 said it in detail, I won't be ugly. I used Trida's gold pipe at home, which felt good, and I also felt quite responsible for his installer that day.

The first brand of celebrity integrated ceiling cost performance.

Fairrit integrated ceiling high-level family roof!

Bath bomb One 2-core power cord (color: blue, red) One 5-core switch cable color (white, blue, brown, black, yellow), the switch wiring is: white wire for switch lighting.

The blue wire switch is ventilated. The copper pillar on the lower side of the brown wire switch ventilation. The black line is connected to heating (controls 2 heating lights), and the yellow line is connected to heating (controls 2 heating lights).

There are 5 lines at the switch, of which 3 yellow lines are from the ceiling to the switch, a red line from the ceiling to the switch, and a red line directly from the distribution box to the switch (220V live wire electricity).