-
Anonymous users2024-01-231. Know what to do (such as a wardrobe).
2. Know its installation position (whether it is installed in the hole) 3. What size can be just right.
4. How many doors do you need in the wardrobe, what knots and plums accompany you in it, and how thick the plate is.
5. Draw three views and internal structure diagram (set the structure) 6. Dismantle the drawing according to each plate, and then write the specifications of the dismantled drawing in the table, and you can place an order after review.
7. Plate drawing: it is necessary to give a cutting drawing, edge sealing drawing, and punching drawing.
8. There is a bill of materials and drawings to produce.
2. 1. CAD software is used to draw drawings, and tables (excel) are generally used to make material lists
Hope it helps.
"The first is the smooth placement.
The floor on which the panel furniture is placed must be flat and the legs must be evenly balanced. If the furniture is placed in a state of constant swaying and shaking, it will inevitably cause the tenon or fastener to fall off and the bonded part to crack over time, thereby affecting the use effect and reducing the life of the furniture. In addition, if the floor is soft and the furniture is unbalanced, Beijing and Junxinmei Furniture recommend that you also do not use wooden boards or iron sheets to pad the furniture legs, so that even if you keep the second clean dust. >>>More
Let's just talk about the production process as follows:
1. Cutting. 2. Edge banding. >>>More
Cutting boards, (milling) edge banding, guide holes, slotting, trial assembly.
1. Cut down fresh logs; 2. Peel off the bark and remove the core of the pith; 3. Fiber crushing into high temperature disinfection and sterilization, and drying to 25% moisture content; 5. Add environmentally friendly resin glue catalyst (containing formaldehyde); 6. Paving tons of high pressure 200 degrees high temperature pat; 8. Plate windmill cooling; 9. Double-sided killing; 10. Plate anti-deformation and health preservation. The production process of layout furniture is: 1. Computer cutting; 2. Mechanical edge banding; 3. High-speed row drilling; 4. Mechanical forming; 5. Quality inspection; 6. Mechanical sanding; 7. Fill putty; 8. sealing and fixing the bottom; 9. Hand sanding; 10. Quality inspection again; 11. spraying primer; 12. Repeated grinding; 13. spraying topcoat; 14. Dust-free drying; 15. Quality inspection again; 16. a three-layer package; The whole process is scientific, rigorous and fully in line with international standards.
This depends on the environmental protection standards adopted by furniture manufacturers, European environmental protection standards are more stringent, such as the European Union 6P standard, at present, the domestic manufacturers who adopt this environmental protection standard are known to be only "Ou Jia Luni".