There is always a slight sound of running water in the toilet tank

There may be water leaks inside, and the switch is leaking, so it is recommended to ask a professional to check it.

The float in the toilet bowl is not topped in place! That is, it is not tightly closed.

There is always a slight sound of running water in the toilet tank because the float valve is not completely closed, there is a little gap, so it is constantly flowing, just replace the float valve.

The toilet tank has always had the sound of running water, because the water scoop in the toilet tank was broken, causing the toilet to be in a state of water all the time, so there has always been the sound of running water. In this case, it must be repaired in time, otherwise a lot of water resources will be wasted, and the service life of the toilet tank will be greatly shortened.

Hello dear, this question has been answered for you If you think this question has helped you, please give a like, can you give a like, thank you in advance here, I wish you a happy life.

There is always a slight sound of running water in the toilet tank, it may be because the toilet tank is leaking, and then the water tank keeps adding water, so there will be a subtle sound of running water, pay more attention to check.

1. Repair method of toilet tank leakage:

1. If the toilet tank is leaking, first open the lid of the water tank and observe what position the water scoop is in when the water inside the tank is full. If the water inside the tank is full and the tank is still flooding, then the tank will definitely leak. At this time, the fault appeared on the water scoop.

The ladle can be replaced, or repaired, after which it is better to lower the position of the ladle.

2. If there is a problem with the water scoop, then check the outside of the water tank, there is a stainless steel hose interface outside the access water tank, and the water in the water tank generally enters the water tank from here. Check whether the water pipe is damaged or not tightened. After that, targeted repairs will be carried out.

3. In addition to the above two possibilities, there is also the possibility that the water tank has been hit by an external force, resulting in the problem of damage to the water tank, resulting in the leakage of the water tank, this kind of problem needs to be repaired, and when repairing cracks, you can use some glue to repair the water tank, but this method can only repair the problem of slight cracks. The crack is too large and can only be repaired or replaced by a professional.

The upper valve in the toilet tank does not function properly (it does not die), the subtle sound of running water is because the valve is constantly entering the water slightly, if the water surface in the tank exceeds the escape hole, the water will flow into the toilet from this hole (some toilet flush outlets have small holes under the water surface, you will not see the leakage).

There is always a slight sound of running water in the toilet tank, and it should be that the float has not closed the valve completely.

Double-check where the float is connected to the valve.

There is a small sound of running water in the toilet, indicating that the toilet is leaking and needs to be repaired in time.

Hello! The specific original bai, the front du

Mine was replaced with the entire drain valve because you could hear the water dripping when the lid was closed.

The same problem as my family, I replaced the agency on the left with a new one, and bought a good one, which is not expensive.

Whether there is a leak in the water tank can be checked by a professional.

The sound of running water in the household toilet is what causes it to share together.

There is always the sound of running water, most likely because the toilet flush is leaking, so that the float in the toilet can't stop the water, and the water has been on the water. This is very easy to do, you can carefully check whether the toilet flushing place has been running water, and also see if the toilet tank is sealed with a problem, can not store water, and has been on the water. Then the space of the bathroom is generally narrow, and the drainage and water are connected to the upper and lower floors, and there will be a possibility that the upstairs or downstairs bathroom has a leakage due to the connection of the water pipe to your bathroom, or the washbasin water pipe, bathtub or shower pipe in your own bathroom has a leakage sound.

Differential exclusion should solve the problem.

Whomping Willow),

There are three reasons why it keeps flowing:

The flap is not properly covered. Resting on it. It's good to do it manually, and the flip cover will leak and replace the flip cover.

2.The float rests underneath. It's not just water. Just do it manually.

3.The water stop valve of the float is not only water, so it has been wading. It flows from the overflow pipe and has to be replaced.

When the toilet is leaking, you can check first:

1. Whether the black semi-circular float on the overboard assembly is properly covered, or the black semi-circular float falls off, or the rope is stuck.

2. Or black semi-circular float variant. (When you touch the black semicircular float with your hand, it will be dyed black, which means that it is time to replace the part).

3. The single toilet downspout component is shaken by hand, if it is shaken, it means that the semicircular fixing piece at the bottom of the downspout component is broken or loose.

And the water in the tank, if the pipe full of the downwater assembly flows out, it is necessary to check the water inlet assembly:

1. There is an adjusting screw on the water inlet assembly to adjust the water level. Tighten it and take a look first.

2. If not, it may be that the water-stopping core (or water-stopping film) in the water inlet component is to be replaced.

There is a float in the toilet (usually a round ball, which is empty), when it is full, the float covers the water inlet upwards, and when there is little water, the float sinks, and it keeps entering the water until it is full.

There is also a plug inside, which is connected to the outer knob with a string, and when you need water, twist the knob, and the lid inside will be opened, and the water will rush out.

After flushing, the lid will close by itself, you have to check whether this lid is closed, if it is not covered, it will always run (because the water keeps flowing out, the water will not be full, the float will not cover the water inlet, and at the same time the water will continue to flow from the outlet into the toilet tank).

Take down the lid of the water tank to see if it is leaking, sometimes its switch automatic rebound function is poor, and it will run for a long time.