Water seeps into the bathroom walls

The walls of the bathroom are seeping water, and the waterproofing is not done well. Just knock off the wall skin and redo the waterproofing. It is best to find a professional master to do it, and the quality is guaranteed.

This is the waterproofing that was not done well at the beginning. Check if there is a leak in the pipes and keep the bathroom dry to relieve it.

It is not easy to repair the water seepage of the bathroom wall, so it is recommended that you can go to an experienced master to repair it.

You'd better upload an image to make it easier to analyze.

Whatever the reason, there is no reason for them to ignore it, and if they do, they will call the mayor's hotline or expose him in the local media. Coupled with the public opinion, I think they will solve it for you in the end.

If it's an old house, I don't think there's any need to consult someone else, because you're going to decorate! If your bathroom is leaking, just re-waterproof!

Buying a small bag of waterproofing agent is actually high-grade cement pre-mixed with very fine quartz sand. About 1 kilogram, 15 yuan. If the color of the cement is dark and affects the overall appearance of the bathroom, there is also a white tile caulk, which looks the same as white ash.

Both are similar in terms of usage: mix them with water to form a sticky paste and rub them over the gaps. Finally, use your index finger to wipe it, and then stick it to the tile next to it and wipe it off with a dry rag after it dries slightly.

After a little waiting, the water gradually decreases and there is no need to repair it. The trend is not reduced, and it needs to be repaired, but don't be so blind when repairing, carefully suppress and test the water, and only after determining can the wall or ground be restored.

The solution: if the sewer pipe is cracked, replace it, if it is a crack in the floor tile, you can use silicone, so that you don't have to smash the floor, but applying silicone is not a long-term solution.

You can remove the tiles in the waterproof part of the door (you can extend inward to remove a few more pieces) and redo the waterproofing. Then do a 24-hour water storage test, the water storage height is the highest 20 30mm, if the inspection is qualified to carry out the laying of tiles, pay attention to the new waterproof layer must be protected in the paving process, so that we can avoid the second water storage test. However, if the water storage test finds that the waterproof layer is still leaking, then there is no way to remove all the bathroom floors and re-do them all waterproofing.

Thorough method: Remove the floor tiles and the bottom layer of wall tiles, remove the floor tiles to expose the original ground, and use a double group.

Parts of the waterproof mortar to do, and then do a 24-hour closed water test to check whether there is water leakage downstairs, if there is a problem.

Continue until it doesn't leak.

I read your description of the scene, and I'm sure it has something to do with the waterproofing of your bathroom.

There is a certain relationship.

If you don't want to knock on the tiles, buy a penetrating waterproof adhesive brush tile joint.

Is this situation responsible for you:

1: In addition to the wall of the bathroom with you, whether the other walls are similar, if any; Your responsibilities are more than half smaller; Or no responsibility.

2: The wall next door: often ventilated or generally blocked by something. Very close to the façade. (No ventilation has an effect, and it is possible to get involved if you are close to the exterior wall.) But not much. ）

3: Just have this kind of problem with the wall of your bathroom, you have a problem with the waterproofing.

If it's really your family's problem, you buy a shower room, which is convenient and simple.

Generally speaking, if there is no problem with checking it once, it means that the waterproofing of your bathroom is not done.

The longest way is to remove the bathroom floor tiles and re-do the waterproofing with waterproof paint, so that it can be done once and for all, but it will be a little troublesome. You can use the leak plugging spirit or glass glue to seal around the pipe wall, and it can also play the function of leak prevention, but this method cannot be insisted on for a long time and must be redone again every month. It's best to find a professional waterproof company to do waterproofing, my family has also had this situation, at the beginning is also ready to do it yourself, not want to save some money, in the end is not a waste of time and money, I am here in Hunan, remember that it is a company of Jiacheng waterproof, I hope to help you, hehe...