The design of the bathroom

Updated on Bathroom 2024-01-27
8 answers
  1. Anonymous users2024-01-23

    My house has been renovated, but some areas are not satisfactory, I think we should pay attention to a few points:

    1. Do a good job of anti-odor and waterproof. The floor drain should be deodorized, and the backwater inlet under the washbasin is best S-shaped.

    2. The hot and cold water pipes should be done well.

    3. The location of the socket, the location of the socket of my water heater has to be changed, I am depressed!

    4. After installing the water heater, seal the ceiling and half-seal the water heater.

    5. Pay attention to the toilet, the toilet should be sealed with glass glue around it, and the two holes in the back should also be sealed, otherwise there will be a smell.

    6. The exhaust fan should be equipped with anti-return air.

  2. Anonymous users2024-01-22

    Big brother: What's your problem?

  3. Anonymous users2024-01-21

    The pillar on the left is not a ventilation shaft, and the bathroom with no ventilation and lighting has this.

    Personally, it is recommended that the handwashing station be separated separately, so that the dry and wet are separated, and the handwashing station is slightly larger, with an empty space of about 700mm, which can also be used as a laundry table. A wall cabinet is made above the sink to store a large number of items. The door to the shower and toilet squatting position is sliding with a sliding door, so that it does not take up space.

    Whether the sliding door is placed inside or outside, it depends on whether there is enough space for your internal squatting position, try to push and pull inward, so as not to occupy the left side of the sink, and the wall on the left side of the sink can be hung and set up a switch. In addition, it is common for the tempered glass used in the shower to be blown up, so you should distinguish the shower from the squatting position, and you should also think more about the way. As shown in Fig

  4. Anonymous users2024-01-20

    Can you consider making a 90*90 curved shower room at the corner of the toilet side, and place the washing machine in the corner of the remaining width, and the position of the toilet basin remains unchanged. The door can be used as an open door or as a sliding door. If this is not possible, the toilet can be moved outward by 5 to 10 cm through the shifter.

  5. Anonymous users2024-01-19

    The toilet is immovable, and it involves the neighbors downstairs. However, if necessary, you can use the shifter to move it slightly by about 100mm.

    The layout of the drawings is already very reasonable, and the door can be sandblasted all-glass door.

  6. Anonymous users2024-01-18

    I think it's best not to move your current layout, the shower is a shower after all, the washing machine must be separated from the shower, and the location of the washing machine must be the driest in the bathroom, so it can only be the position where the toilet is facing now.

  7. Anonymous users2024-01-17

    Toilet is a combination of toilet, toilet, and bath. Residential bathrooms are generally divided into dedicated and communal. The dedicated one serves only the master bedroom; The common ones are connected to the public walkways and are shared by other family members and guests.

  8. Anonymous users2024-01-16

    OK. The clever combination of special waterproof infrared lamps and ventilation fans combines multiple functions such as heating, infrared therapy, bathroom ventilation, daily lighting, decoration and so on.

    The advantage is that the user is very comfortable. The disadvantage is consumer credibility.

Related questions
10 answers2024-01-27

European style mainly refers to Western classical style. This style emphasizes the use of gorgeous decorations, strong colors, and exquisite shapes to achieve a graceful and luxurious decorative effect.

4 answers2024-01-27

Most family bathrooms use low-chroma and high-brightness color combinations to set off a clean and refreshing atmosphere, so the overall lighting of the bathroom does not have to be too sufficient, as long as there are a few key points. In the selection of lamps, incandescent lamps should generally be selected as a whole, and independent lighting lamps must be set up next to the makeup mirror. Some families set up a circle of small spotlights around the mirror, although beautiful, but the waterproof nature of the spotlights is slightly poor, and it is only suitable for the bathroom space where dry and wet are separated. >>>More

1 answers2024-01-27

I don't know how you plan for the function of the room on the left side of the picture, if you don't have a specific plan, you can reconsider the layout of the overall house, because you can see that several walls of your house are thin walls, and there is a lot of room for change.

7 answers2024-01-27

1. The dry area is designed outside the bathroom.

Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry. >>>More

3 answers2024-01-27

FRP ventilation ducts, whether it is factory facilities of factories and mining enterprises, or civil office buildings, municipal underground facilities, air conditioning ducts, ventilation pipes, fire and smoke exhaust pipes, the traditional production materials are made of white iron sheets. However, in practical application, the white iron sheet air duct exposes problems such as rust if it is not waterproof, poor corrosion resistance, troublesome on-site production, unsatisfactory thermal insulation performance, short service life, unsatisfactory fire prevention effect, and difficult daily maintenance. >>>More