-
Anonymous users2024-01-231. The float valve can be lowered to limit the height of the water level. 2. I saw that some friends put a few mineral water bottles full of water in the water tank in order to save water, reduce the water capacity of the water tank, and the water flushed out each time will become less.
-
Anonymous users2024-01-22According to the different tank accessories, the water inlet components are divided into: float type, inner cylinder type. The float type needs to adjust the height of the float, that is, the water level can be adjusted, and the float is low and the water level is low, and vice versa.
-
Anonymous users2024-01-21Open the lid of the cistern behind the toilet bowl and adjust the adjustment float switch.
If you don't use it, it's hard to get used to this behavior, so remind me more.
Water pieces. In general, there are only a few brands in the market. Geberit is the best of these. The brand is the loudest. Everything else is pretty much the same. The toilet parts in the middle of the market are average, but there is no problem with normal use for a few years. The high-end ones will be equipped with Geberit water parts.
There is a toilet splash-proof product, its idea is to install a hollow rubber airbag at the bottom of the toilet cushion, place a special balloon on the inner wall of the toilet, this balloon will not burst with a needle, and then use the trachea to connect the balloon with the airbag, when you defecate, you must put the toilet cushion down, and then sit on it, when you sit down, the airbag is under pressure, and the air inside flows to the balloon, so that the balloon is inflated, and the stool falls directly on the balloon, not directly in the water, In this way, there will be no splashes on the buttocks, when the rubber airbag is not under pressure, the air in the balloon will automatically flow back to the airbag, and it will not clog the toilet when flushing.
Open the toilet lid and adjust the valve.
Tip: Spread a paper towel on the water before pooping.