What should I do if the steel wool ball falls into the toilet and is blocked

1. On the street or in the supermarket, go to buy a sewer utensil, which is hand-scratched, rolled with steel wire, slender, with a small hook at the front end, put it into the toilet and scratch it, and bring the steel wool ball (or cloth ball) out of the roll. If you can't buy the utensils, you can't do anything, just call a special maintenance personnel to deal with it.

2. Dredge with a hand-cranked dredger; Rubber, pay attention to the skills, push down, and lift up violently! Girls generally don't have that much strength, and they may not be so good in terms of skills. Connect one end of the soft rubber hose to the faucet and the other end to the drain, plug the cloth and seal it tightly.

Turn on the faucet slowly and use the water pressure to flush the dirt out.

Information: 1. We must always clean the pipes, flush holes, and filters. It is best to clean pipes and flush holes with a nylon brush with a long handle and soapy water or mild detergent, and it is recommended to wash them at least once a week. Filters should be cleaned at least once a month.

2. Beware of sewage sediment blocking the return air hole. It is forbidden to pour cement, lime, paint and other sewage into the toilet to prevent the sediment of sewage from precipitating and agglomerating in the toilet and easily blocking the air return hole for a long time. The water released from the toilet does not form a vortex and reduces the impact force.

3. Beware of feces blocking the air return hole. Do not rush into the toilet with newspapers, diapers and other easily clogged items, and if it is blocked, immediately remove it with a skin suction device. The return air hole of the toilet should be checked frequently for blockage, and the blockage in the air return hole should be cleared frequently.

The steel wire ball can be blocked by the toilet bowl, and it can be clamped out with a thin steel wire spring that dredges the sewer, and do not use a leather wire and other tools to hook it, otherwise it will dredge more and more down, and it will be more difficult to dredge.

Answer 1: The toilet is blocked by a steel wool ball, and a simple dredge can be used to hook it out; 2. Prepare a soft wire, make a hook at the front end, reach into the toilet drain pipe, and hook out the steel wool ball; 3. Choose a slender object with a hook, which can also hook out the steel wool ball; 4. If you can't tick it out, you can only contact professional workers.

If it is deeper, it is estimated that it is not easy to come out, it is recommended to dredge the sewer, they have special machines.

The steel wool ball fell into the toilet and was blocked, and this one can be found to be professionally poked into the toilet bowl and can be sucked out.

Hurry up and fish out the steel wool ball, if you want to rush down, it will definitely not work, and it is impossible to melt it.

1. Wire hook out.

After the steel wool ball is blocked in the toilet, it can be disposed of with iron wire. Prepare a thicker wire, bend one end into a hook shape, then reach into the toilet, hook the steel wool ball, and then pull the wire outward, you can take out the steel wool ball.

2. Special tools for cleaning.

Wire balls are clogged in the toilet bowl and can be disposed of with professional tools. Buy a special pipe dredging tool in the market, put the spring end into the toilet, and then turn the handle to let the spring extend into the steel wool ball until it can't go deeper, take out the spring, and the steel wool ball will be pulled out together.

3. Handled by professionals.

If the steel wool ball cannot be taken out by the above method, it means that the part of the steel wool ball blockage is deep, and it is necessary to consult professional pipeline dredging personnel, and ask the other party to provide door-to-door service, wait for the staff to come to the door for maintenance after the agreed time, and pay the relevant fees.

There should be something that sells that kind of thing in the supermarket, like a steel wire, directly wound, almost, a mention, the things inside are pulled out, and it is too expensive to find a professional dredge person than to sell this.

The steel wool ball blocking the toilet bowl can be removed in the following ways:

1. Take out the steel wool ball with a simple dredger.

2. Find a soft steel wire to make a hook, and hook the soft steel wire into the toilet mouth 3. Make a hook with a small iron wire, and you can also hook out the steel wool ball.

4. Use other soft and fine objects with small hooks on the head to hook out the steel wool ball 5

1. The steel wool ball has a lot of small holes, which are easy to be hooked by a small hook 2. The passage from the toilet mouth to the pipe is generally crooked, and can only come in handy with soft and fine objects.

Take it out with a simple dredger, or you can find a soft steel wire to make a hook to hook it out.

1. The hand dredge (like a spring thing) can be dredged by itself.

2. Find professionals to dredge.

3. In principle, the steel wool ball should be pulled outward, not pushed inward.

In the case that the soft steel wire cannot reach the steel wool ball, you can use the common pressure device (leather pick) in the market, because the steel wire ball is loose and has a gap, it is not easy to concentrate the pressure, so it depends on luck.

Put more water to flush the toilet bowl (so as not to look uncomfortable), throw a few pieces of toilet paper to further block the toilet bowl to form a pressure zone, and continue with a leather pistol, which is easier to form pressure.

Try it yourself, and you can do it at home. The premise is to rinse it with a lot of water, otherwise it will affect the mood of the operation.

It's really not good, so get ready to dismantle the toilet.