How to repair furniture lacquered furniture repair seven tricks

Tools needed for furniture repair: 502 glue, 2000 grit sandpaper, flour, small carving knife, rag, outline pen, putty.

1.Start by filling the broken areas of the furniture with dry flour.

>2.Apply 502 glue to the damaged area to allow the flour to absorb, wait for a while, and the glue will solidify.

>3.After the glue has solidified, we use a small shovel to remove the excess flour and make the furniture surface almost flat.

>4.We use sandpaper to smooth out the breakage.

>5.Use a dark yellow crayon to paint the broken area.

>6.Then use a black outline pen to draw the line.

>7.Stripes are carved with a utility knife so that the ink of the sketching pen can be absorbed, revealing a wood-colored pattern.

>8.Finally, wipe it clean with a damp cloth.

Tools needed for furniture repair: 502 glue, 2000 mesh sandpaper, bai flour, small carving knife, rag, outline pen, putty. zhi

2.Apply 502 glue to the damaged area to allow the flour to absorb, wait for a while, and the glue will solidify.

3.After the glue has solidified, we use a small shovel to remove the excess flour and make the furniture surface almost flat.

4.We use sandpaper to smooth out the breakage.

6.Then use a black outline pen to draw the line.

7.Stripes are carved with a utility knife so that the ink of the sketching pen can be absorbed, revealing a wood-colored pattern.

8.Finally, wipe it clean with a damp cloth.

Method 1:

1. Ruojia. If there is a small part of the paint in the furniture, you can take a nail polish and apply it to the paint part of the furniture where the paint has fallen off to remedy.

2. If the area of furniture paint is relatively large, you can use old books, waste newspapers, alum, and frosted paper first. First, cut the old newspapers and old books into pieces, then add the waste crumbs to the alum and cook them together to make a paste, and then wait for the paste to dry, and then remedy the paint in the paint removal part.

Method 2: 1. Directly fill in the damaged parts of the furniture with latex and sawdust brushes, wait until the paste is dry and hard, polish it with sandpaper and smooth it, and then apply the same pigment as the paint color to the part that has fallen off.

2. After the pigment is dry, it can be painted again with varnish, which can also play a remedial role, but in the process of application, be careful and patient, and focus on uniformity.

1. If the paint surface of the furniture is burned and damaged, you can wrap a layer of fine-grained hard cloth on the toothpick, gently wipe the traces, and then apply a thin layer of wax to remove the scorch marks; If the paint surface of the furniture is scratched, you can use crayons or paints consistent with the color of the furniture to wipe the wound surface of the furniture to cover the exposed base color, and then apply a thin layer of transparent nail polish; If the wax oil drips on the lacquer surface of the furniture, do not scrape it with a sharp blade or fingernails, wait until the light is good during the day, use a plastic sheet, clasp your hands, lean forward, slowly scrape the wax oil from the front of the body, and then wipe it off with a fine cloth.

2. Eliminate water marks and water drips on the furniture, if you don't dry it immediately, it will leave traces of water stains. In this regard, you can use a damp cloth to cover the marks, and then carefully press the damp cloth several times with an electric iron, the moisture of the marks will evaporate when exposed to heat, and the water marks can be eliminated.

3. Remove the old paintIf you want to remove the paint of the furniture, you can apply the invalid developer to the paint surface of the furniture, and the old paint can be removed. After washing and drying, it can be repainted with fine sandpaper and smoothed.

4. Furniture rust removal chrome plating furniture rust, do not use sandpaper to polish. The small plating pieces can be soaked in a basin of organic oil for 8 to 10 hours and rubbed with a cloth. If the large plated furniture is rusty, you can first use a brush or cotton yarn dipped in engine oil to apply it to the rust, wait for a while, wipe it with a cloth, and then remove the rust.

5. After the surface of the furniture is bulging and decorating the veneer to produce bubbling, you can first use a sharp blade to cut a knife in the middle of the bubble along the direction of the wood grain, and then use a syringe to inject the glue into the seam, gently press the upper part of the bubble with your fingers, wipe the overflowing glue with a damp cloth, and then press it on it with a heavy object with a smooth bottom surface and larger than the bubbling area. In order to prevent a small amount of glue from spilling out after pressurization and sticking to the surrounding surface of the bubbling, the bubble can be separated by a plastic film, so that the decorative veneer is flat.

6. Repair dentsSome furniture will leave dents after collision due to soft wood. At this time, you can put a damp towel in the depression first, and then heat and iron with an iron to restore the original shape. If the dent is deep, add a filling.

7. If cracks appear in solid wood furniture due to thermal expansion and contraction, the following remedial measures can be adopted; The old cotton cloth or broken sack is burned into ashes, and then mixed with raw tung oil to form a paste, embedded in the cracks of the wood, and can be flattened and glued after drying. Or, tear the newspaper to shreds. Add some alum and water, boil it into a thick paste, cool it and coat it in the cracks of the wood, and it is very firm when it dries.

The difference between toner and paste.

In order to solve the confusion of many people in the paint repair industry, how to distinguish the comparison and how to make comprehensive use of technology.

1. Maintenance generally needs to meet two requirements, the first effect, the second efficiency.

From the point of view of learning, it is also different, in fact, there are many materials and techniques for local paint maintenance, an empirical technology, each master who has been engaged in a certain period of time, will have different habits and techniques, and can improve the efficiency of the method while ensuring the effect, so there will be their own innovation, the ultimate purpose and role, in different situations to flexibly apply different methods!

2. For a long time, some people make money by working in the market, and some of them specialize in training technology to make money, and each master has his own innovation when he says that there is a new technology, perhaps to distinguish the other, almost everyone is like this.

3. All kinds of technical guerrillas in the market, including installation, stairs, wooden doors, etc., are also installed, and do not slander others among the guerrillas, and the professional quality is higher! Some even exaggerate, even learn from others to start, imported materials, imported technology, even people specialize in international trade do not know, some materials and technology is how to do, can not find it, some people do not understand the United States imports, people's high-end home in addition to construction, almost every year is changing, people do not repair, where are the materials and technology exported to you?

4. Don't think that you will innovate, maybe others often innovate, for a little bit of innovation is not in the eyes at all, innovation is good, if this makes you complacent, exaggerated, slander and slander others, then congratulations, while innovating to change technology, but also changed their own character and quality cultivation!

5. The process and difference between learning technology and business technology.

I feel that the "Green Three Valleys" is still relatively real, the technical materials are comprehensive, and the maintenance service is not bad!