Renovation of the kitchen about the size of the built in washing machine in the cupboard

There is no special built-in washing machine The basic practice is to choose the washing machine first, and there is no need to rush to buy it after choosing, first ask the waiter to get the length, width and height data of the washing machine Then when designing the cabinet, reserve 2 4 cm of space on both sides and above, and leave as much space as possible in the back to facilitate heat dissipation and water inlet drains, wires and other things If you want to be completely seamless, you can choose to make a door that just covers the gap, and make it two.

Inverted L" type door, it is not recommended to seal directly to seamless, or it is troublesome to just stuff the washing machine in, let alone install or repair Of course, if you choose to make the door, it will be more beautiful to reserve a little more space, but it will also take up more space.

Do not close tightly, to prevent the washing machine from being easily taken out when it needs to be repaired in the future, the washing machine also needs to breathe, and there must be air circulation, which is anti-bacterial, and can dissipate heat and moisture. It is recommended to leave at least 3-5 cm on 3 sides.

There is no professional inlay on the market, but the general washing machine can also be used, just pay attention to heat dissipation, pay attention to leaving gaps, pay attention to the input and output of water, and be sure to pay attention to the length, width and height of the space. Call a technician to help you.

First of all, you have to buy a washing machine according to the height of the cabinet. There are a lot of them on the market now. One thing to note is that the lid on the top of the washing machine can be removed so that it can be embedded.

The standard height of the cabinet plus the skirting is 720mm, the depth is 580mm, and the depth of the countertop is 600mmThere are generally gaps. I can't put it in because I don't have time.

It won't be too big, 10mm-20mm is OK

After the retest, the position is basically determined. Ordering cabinets is the first step in decoration because cabinets involve the problem of water and electricity levels. The plumbing and plumbing levels in the kitchen are all according to the design drawings of the cabinet store.

If you wait for the completion of the water and electricity and the bricks in the order, it will be more limited It is recommended that you order the cabinets, bathrooms, and heating when you have a rough wall and a floor.

Generally, you buy a washing machine to embed, and leave some pores.

THE SO-CALLED BUILT-IN WASHING MACHINE IS THAT THE WASHING MACHINE DOOR AND OPERATION BUTTONS SHOULD BE OPENED ON THE FRONT RATHER THAN ABOVE, AND THE SIZE OF THE WASHING MACHINE SHOULD NOT BE TOO LARGE, GENERALLY 600MM*600MM*700 TO 850MM HIGH.

Now some brands also have the name built-in washing machine. For example, Haier built-in drum washing machine, Italian gold medal built-in drum washing machine, etc.

If you have enough time for decoration, you can roughly turn the washing machine around the market before sizing the cabinets. Generally easy to find. After roughly determining the size of the washing machine, you can make cabinets according to the size of the washing machine, if you find a cabinet company, then the cabinet company will help you consider the problem of washing machine embedding.

It is best to leave a certain gap in the cabinet embedded in the washing machine, about 20MM, to facilitate maintenance and ventilation and moisture removal!!

The color of the washing machine can be selected to match the color of the cabinet or match.