-
Anonymous users2024-01-23Use expansion screws, large hangers, nuts, and pistol drills to fix the boom spacing according to the area of your kitchen or bathroom, generally within 5 square meters, 4 points can be played.
-
Anonymous users2024-01-221. It is fixed with an expansion head, a full wire boom and bolts.
2. The distance between the booms should generally not exceed 1 meter.
1. The distance between the boom and the end of the main keel shall not be greater than 300mm, and the boom shall be increased when it is greater than 300mm. When the length of the boom is greater than , the counter-support should be set up, and when the boom meets the equipment, the boom should be adjusted and the boom should be added.
2. An electric drill is required when fixing with expansion screws, full-wire booms and bolts.
3. The boom is fixed on the ceiling with expansion bolts, and the ceiling is generally 20-25cm away from the ceiling.
4. The main keel can be installed in the direction of length according to the actual situation, and the height should be slightly less than the height you want, and there should be a secondary keel below.
5. When the length of the boom is greater than , the counter-support should be set up, and when the boom and the equipment meet, the boom should be adjusted and the boom should be added.
-
Anonymous users2024-01-21Expansion screws, but with tools, electric drills. Thank you for adopting.
It's basically a meter or a meter!
Use wooden strips to nail wooden beams to make a boom.
The tensile bearing capacity of the boom depends on two factors, one is the bearing capacity of the boom itself, and the other is whether the anchorage of the boom is sufficient. As far as 8 is concerned, the maximum tensile bearing capacity is 1358Kg. >>>More
Scaffolding and boom fixing are available.
Reserve a wooden stall at the hanging lamp place so that you can install the lamp bracket later.