-
Anonymous users2024-01-23Solid wood particle board is a big name, which is divided into medium density and high density. The general properties are the same, because the particles are glued with each other, and the formaldehyde content will be much higher than that of multi-layer woodworking boards.
Main advantages of solid wood particle board:
1. MDF is easy to finish. All kinds of coatings and paints can be evenly coated on the MDF, which is the preferred substrate for paint effect.
2. MDF is also a beautiful decorative board.
3. All kinds of veneer, adhesive film, veneer, light metal sheet, melamine board and other materials can be glued on the surface of MDF.
4. The hard density board can be punched and drilled, and can also be made into sound-absorbing boards, which are used in the decoration of buildings.
5. Excellent physical properties, uniform material, no dehydration problem.
Main disadvantages: 1. The biggest disadvantage of MDF is that it is not moisture-proof, and it swells when it sees water. When using MDF as baseboards, door cover boards, and window sill boards, you should pay attention to painting on all sides, so that they will not be deformed.
2. The expansion rate of MDF when exposed to water is large, the deformation is large, and the long-term load-bearing deformation is larger than that of homogeneous solid wood particle board.
Although the moisture resistance of MDF is poor, the surface of MDF is smooth and flat, the material is fine, the performance is stable, the edge is firm, and it is easy to shape, which avoids problems such as decay and insect moth. It is superior to particleboard in terms of flexural strength and impact strength, and the decorative properties of the surface of the board are excellent, especially compared to the appearance of solid wood furniture.
3. The nail holding force of MDF is poor, and the nail holding force of MDF is much worse than that of solid wood board and particle board due to the fact that the fiber full of density is very broken.
-
Anonymous users2024-01-22It must be that the formaldehyde of the particle board bed is highly volatile, and what binds the solid wood particles together is urea-formaldehyde glue, which contains uncured formaldehyde; Under the action of moisture in the air, the glue will also slowly decompose formaldehyde. Oak beds made of solid wood do not have a similar problem.
-
Anonymous users2024-01-21Solid wood pellets have a higher formaldehyde content and contain glue.
-
Anonymous users2024-01-20Solid wood particle board is still better, I have it at home, I hope it can be adopted.
Solid wood particle board is a kind of board, wardrobe, sofa, bed, floor and other materials can be made of solid wood particle board, it has many functions, the actual function of solid wood particle board is not much worse than other solid wood boards, but there are many benefits, coupled with the relationship between high cost performance and very hot in the market. With people's attention to health, people will not only look at the aesthetics and other factors when choosing decoration materials, but also pay attention to its environmental value. Next, I will introduce to you whether solid wood particle board contains formaldehyde? >>>More
This kind of board has a high formaldehyde content, choose carefully!
The advantage of general solid wood particle board is that the amount of adhesive is very small, which means that its environmental protection is very good, it is compared with the real solid wood board, the board surface is wide, the appearance is smooth and smooth, there are no knots, insect eyes and anisotropy and other shortcomings, no warping, no cracking, high physical and mechanical strength, longitudinal and transverse strength, sound insulation, mildew prevention, economy, heat preservation, etc. However, when it comes to wardrobes, multi-layer solid wood boards are better, because the area of multi-layer board bonding is less than that of solid wood particle board, and its environmental protection level can reach E1.
Solid wood particle board is made of some good solid wood material heads into pellets, MDF is actually MDF, the manufacturing process is to beat the plant into fibers, powder shape. Of course there are many adhesives for powder, too. And solid wood pellets are better than MDF nails. >>>More
If it is good for the environment, it must be good for solid wood compression, because it replaces solid wood furniture to a large extent and reduces indiscriminate logging; >>>More