What is the most firm way to paste the wall tiles in the bathroom

Bathroom walls are pasted with polished tiles and tiled adhesives. Self.

Porcelain bai brick adhesive, also known as tile adhesive du

or tile adhesive zhi

It is divided into ordinary type, polymer type, and DAO heavy brick type, which is mainly used for pasting ceramic tiles, face tiles, floor tiles and other decorative materials, and is widely used in interior and exterior walls, grounds, bathrooms, kitchens and other building finishing decoration places.

Its main characteristics are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction, which is a very ideal bonding material.

Adhesive material: Yi cement is available at tile stores.

Clean the walls. Use a spirit level to set the latitude and longitude lines.

According to the size of the tile, shoot the horizontal and vertical ink line version.

Adjust the cement into a paste, smear a certain thickness on the back of the right tile, paste it from the inside out, stick it from the highest point down, and use a rubber hammer to properly tap the tile surface to make it close and vertical.

The tiles in my house were put on by me and they worked very well.

Three points: first, the tile is good;

Second, the cement is good;

Third, the tiling master has good craftsmanship. (The tiles must be soaked in water, and it is best not to paste them in winter).

Now apply the tiles.

Because the quality of porcelain bricks is getting better and better, and the size of the tiles is getting bigger and bigger, the corresponding water absorption rate is reduced, and the difficulty of DAO bonding increases. In order to better ensure the effect of bonding, it is recommended to use special tile adhesive to bond, so that not only the bonding force is stronger, the effect of bonding is better, and the construction process is relatively simple, and there is no need to wet the wall, soak the tile, fix the support and other processes. Here's how to do it:

1. Pour the porcelain sticker powder into clean water and stir it into a paste (mixing ratio: 20kg powder 6kg water), after stirring, it needs to stand still for about 10 minutes, and then stir slightly before use, which helps to increase the adhesion force.

2. Use a toothed scraper to apply the glue on the working surface to make it evenly distributed and form a toothed shape.

3. Knead the tiles on the top during the drying time.

There is a kind of tile adhesive, add a little in the cement yellow sand, the effect is better.