-
Anonymous users2024-01-23It's all the same, but solid wood is better than composite.
Solid wood flooring laying and maintenance points.
1) The floor should be laid in the later stage of construction, and no cross construction should be allowed. It should be sanded and painted as soon as possible after laying. This will not stain the floor or deform it with moisture.
2) Before laying the floor, it is advisable to unpack and stack it at the laying site for 1 2 days to adapt to the environment, so as to avoid expansion and contraction deformation after laying.
3) Moisture-proof measures should be taken for laying, especially in humid occasions such as the bottom floor. Moisture-proof measures include coating moisture-proof paint, laying moisture-proof film, using bedding treasures and so on.
4) The keel should be flat and firm, do not use cement reinforcement, it is best to use expansion bolts, Meigu nails, etc.
5) The keel should be made of larch and liu'an wood with strong nail grip. The moisture content of the keel or rough floor should be close to the moisture content of the floor. The keel spacing should not be too large, generally not more than 30 cm.
Both ends of the floor should be implemented on the keel, not empty, and nails must be nailed to each keel. Water-based glues should not be used.
6) The floor should not be spread too tightly, there should be enough expansion joints (cm) around it, and it should not be laid ultra-widely.
7) The floor and the hall, bathroom, kitchen and other stone ground junctions should have thorough isolation and moisture-proof measures.
8) The color difference of the floor is unavoidable, if there is a higher requirement for the color difference, it can be sorted in advance and a gradual transition method can be adopted to reduce the sense of visual mutation.
9) Do not rinse with water during use, avoid long-term sun exposure, continuous direct blowing of air conditioners, and prevent rainforest and hard objects from hitting and rubbing at the window. To protect the floor, waxing can be done on the lacquered surface (waxing is better than painting from the point of view of protecting the floor).
It is recommended to buy "laminate flooring". Because the surface coating of "laminate flooring" is commonly known as "aluminum oxide": the "gem layer" is particularly hard, and the nail scratch is not afraid, while the surface layer of "laminate flooring" is solid wood coated floor paint, and the wear resistance is much worse than that of "laminate flooring", so it is recommended to buy "laminate flooring". >>>More
Solid wood is also known as log flooring, as the name suggests, solid wood flooring is a floor directly processed from logs. Hardwood floors are back to basics and have a natural texture. It has the following advantages and disadvantages: >>>More
1. Good, sound and heat insulation: The solid wood floor is made of hard material, meticulous wood fiber structure, low thermal conductivity, and the effect of blocking sound and heat is better than cement, ceramic tile and steel. Hungry cherry blossoms. >>>More
Is it better to level the solid wood floor or use the keel directly? Generally speaking, laying solid wood flooring needs to play keel, and solid wood parquet usually has a larger format size, and can be installed without a keel using the suspension method, which is more efficient, greatly reduces the cost of money and time for installation, and also avoids product quality accidents caused by keel. When laying parquet, first of all, it is necessary to determine whether the ground is flat, local unevenness can be done local leveling, if a large area is uneven, you can consider self-leveling, if the height difference at home is large, you can consider doing keel, the installation effect of parquet and the relationship between ground flatness is great. >>>More