-
Anonymous users2024-01-23Furniture are pasted with nano ceramic film, in fact, to furniture film and car film is a reason, before pasting with a special cleaning solution to clean the furniture countertop, and then cover the film to scrape off bubbles. There will be moisture between the film and the countertop at the beginning, but it will slowly evaporate, and it will stick firmly after a period of use. After a few years, even if you want to uncover it, you still need professionals to uncover it.
-
Anonymous users2024-01-22There are many types of furniture films, and they correspond to the needs of these different types of furniture. For example, the stove, marble surface, tempered glass surface, is made of nano ceramic furniture film paste, high viscosity, good fit. Water-based paint, nitro paint furniture needs to be pasted with electrostatic metal silicone home film, new technology, no degumming to protect the furniture paint.
Solid wood open lacquer furniture, then need a special crystal film to paste, specifically corresponding to the shrinkage of solid wood furniture research and development, good fitting effect, low viscosity.
Solid wood floor film is not good, wood products have a lot of pores, need to maintain gas interaction air circulation, keep the floor dry, if the film is pasted, the temperature deviation is too large, there will inevitably be gas (water) on the film, the consequence may be the floor bubble arch, the floor deformation.
To put it simply, it is the business that is fooling, the solid wood composite door must be painted, at least the process of three bottoms and three sides is good-looking, this needs to be seen, this thing is not too superstitious brand, I hope it can help you!
The surface treatment of mahogany furniture is only large lacquer paint or hot wax and baking wax, high-grade mahogany furniture hot wax treatment, general mahogany furniture large lacquer paint, spray paint and film can not, this is not the surface treatment process of mahogany furniture. Thank you.
1.Pay attention to the inside and outside of the furniture, the position of the wood grain, scars and splicing seams on the front and back, just corresponds to the pure solid wood furniture, not the furniture with veneer or decorative surface. >>>More
This is not clearly defined. However, in a general sense, pure solid wood furniture is processed on the basis of pure solid wood and processed on the surface of the furniture by varnish, paint, or polishing. Without adding any other additional items, it can be called pure solid wood furniture. >>>More