Jutong decoration complained about how to waterproof and plug leaks in the toilet toilet

Updated on Toilets 2024-01-28
1 answers
  1. Anonymous users2024-01-23

    1. If you want to replace the floor tiles in the bathroom After chiseling off the original floor tiles, you should first level the ground with cement mortar, and then do waterproof treatment. This avoids leakage of the waterproofing coating due to uneven thickness.

    2. It is necessary to keep the sewer unobstructed in all the sewer pipes in the bathroom, including floor drains, sewer pipes of sanitary ware, etc.

    3. After the construction of the toilet is completed, block all the sewer in the toilet and build a 25 cm high one at the door"Kan", then fill the bathroom with 20 cm of water. After 24 hours, check the surrounding walls and floors for leaks.

    4. The joints should be painted in place, the joints between the bathroom wall and the ground, and the joints between the water and sewage pipes and the ground, which are the most likely places to cause problems. Treat the corners and corners well, and all waterproof paint must be applied"in place"。

Related questions
5 answers2024-01-28

The polyurethane effect is good, the polyurethane is easy to construct, and the price of polypropylene cloth is cheaper, but the construction difficulty is a bit high, and the polyurethane can even be constructed by itself. >>>More

9 answers2024-01-28

How do you make a bathroom waterproof? Let's find out.

Bathroom waterproofing needs to be painted with waterproof paint twice, the first waterproof coating needs to ensure that it is firmly combined with the base layer, and then brush the second time after the first paint is dry, and then carry out a closed water experiment after completing the brushing, and observe that there is no leakage before it is completed. >>>More

5 answers2024-01-28

1. Bathroom waterproof construction steps.

Step 1: You can use a slightly coarser cement to base the foundation first, and then brush the waterproof paint after the cement is dry. But in painting money, the ground should be flat and there should be no grooves. Water is then sprinkled on the ground to expel the gas from the small holes. >>>More

8 answers2024-01-28

The steps to make the bathroom waterproof are as follows: >>>More

2 answers2024-01-28

How to do a good job of bathroom waterproofing Andro Waterproofing - Home Waterproofing Expert. >>>More