-
Anonymous users2024-01-23Flat, horizontal and vertical.
The gap is uniform and the pattern is consistent.
The paste is firm and should not be hollow.
The slope of the water pasted on the floor of the bathroom is reasonable, and no water is retained.
The corners are edged at 45° or with special angles.
-
Anonymous users2024-01-22The walls are flat and the ground can be drained.
The floor tiles of the bathroom should choose non-slip matte tiles, and the water absorption rate must be low, because the bathroom has a large water vapor, the ground is often very wet, and if the water absorption rate is high, it is very troublesome to clean, and it is easy to fall down if it is too slippery. >>>More
After smashing the original wall, first level the top and bottom with cement next to the corner line. Then use aluminum profile with grooves, which are cut according to the size of the wall and fixed with expansion screws. Then it is to put glass, and when choosing glass, it is best to choose tempered glass. >>>More
What brand of ceramic tiles is better for new house decoration, bathroom and kitchen, and it is economical? Kitchen wall tiles: 300 450 (mm) seamless tiles, easy to take care of Kitchen floor tiles: >>>More
Yes, smooth through the joint, the seam is generally left in millimeters, and the tile is less than 10 cm can not be pasted, and it is well planned.
(1) Grassroots cleaning: first use a shovel and a broom and tools to remove the protrusions, mortar and pimples on the surface of the grassroots and clean up the dust and debris, and carefully clean up the yin and yang corners, pipe roots, floor drains and other parts. >>>More