-
Anonymous users2024-01-23According to its internal structure, the flush toilet can be roughly divided into three categories: ordinary ball valve flush toilet, self-controlled water-saving flush toilet, and pneumatic flush toilet.
Ball valve flush toilet: Generally, there is a plastic float and a rubber piston in the water tank, plus an inlet pipe and an outlet pipe, and a sewage pipe, which controls the water inlet and outlet of the water tank through the buoyancy of the float, and it is also more convenient to operate, but the service life is not very long, and the price is cheap.
Self-controlled water-saving flush toilet: above the toilet body is a large water tank, and a small water tank is placed inside the large water tank, and the small water tank has a water inlet control device and a floating body
Pneumatic flush toilet: using the international advanced high-tech sealed flushing device, the water consumption is less than 6 liters, the straight-line transportation distance reaches 9 meters, and the flushing power is particularly strong! The new base design, shape and pipeline ensure unimpeded drainage, and the reserved water surface is 40% larger than the traditional area, which reduces the cleaning workload and is more expensive.
According to the external structure: there are one-piece toilets, split toilets, and built-in toilets.
One-piece flush toilet: refers to the toilet tank and the base part are connected, therefore, the installation is relatively simple, not easy to hide dirt, and the space occupied is smaller than that of the split. Its shape is relatively simple, novel, and high-end.
Split flush toilet: refers to the toilet tank and the base part are separated, and the base part needs to be connected with the water tank with screws during installation, so the installation is more troublesome, and its connection is easy to hide dirt and is not easy to take care of.
Built-in flush toilet: also known as built-in, mainly refers to the fact that the water tank part of the toilet is embedded in the wall, and only the key part is left on the wall, which is easy to install, and there is no dead corner of dirt, but it is not easy to repair.
The smell of the toilet at home is mostly caused by the toilet. When the toilet is dirty, in addition to rolling up your sleeves to clean it, you can also pour Coke into the toilet bowl to deodorize it. Another recipe is to burn matches or candles in the toilet to change the air in the room as it burns. >>>More
Reason: The toilet does not drain, which may be caused by the water pressure in the home being too low. >>>More
The flush toilet consists of the following main parts: inlet pipe, outlet pipe, seepage pipe, water plug (inlet and outlet), float, drain knob and lever, water refill mechanism, water tank, urinal (the urinal has a bend that connects to the water tank). >>>More
I don't know where you live, how to say it, the price is a little worse in different regions, tell you the approximate purchase price, the most inferior Henan out of the hundred hanging zero, Tangshan small factory is not much more expensive, a little better two or three hundred yuan can be about the same, porcelain enamel is better. The important thing is that the accessories and covers should be original, and Xiamen is good. Of course, the brand is good, but it's not worth the money. >>>More
I have sold toilets, so to answer your question, you may be in this situation because the water in the tank is too full, from the water outlet to the toilet, this side slowly flows, there is slowly water in, there is also a possibility, that is, there is a lid in the tank, you press the switch on the tank, the lid is lifted, the water is flushed down by pressure, there is a leather cushion under the cover. It is attached to the mouth underneath, and if the leather cushion is broken or broken, it will definitely run slowly. You see if it's what I'm talking about, I hope it can help you...