-
If the sticker head is thin, cement and glue will do, and if it is thick, you can add some fine sand in moderation.
-
It is recommended that you use polymer cement and tile adhesive for bathroom tiles, the performance of the two is similar, and it is more solid than simple cement Gaza, because the bathroom is damp and relatively humid, and the use of cement and adhesive can be bonded firmly, and it will not fall off.
You can go to the above to see the introduction of polymer slime products.
-
Yes, it would be better if you had a local adhesive for tiles.
-
Cement is not added, and the joints are covered with white cement after pasting.
-
Cement and sand can be used. Tile adhesive can also be used.
Use tile adhesive to paste the tiles. Tile adhesive is a polymer-modified cement-based tile adhesive powder.
Strong adhesion, flexibility, good anti-seepage function;
The adhesive layer is thin and uniform, and it is not easy to hollow out;
Reduce the process, do not need to soak the brick wet wall, and the construction is convenient;
It has good water retention function, and the scraper method can be used to speed up the construction speed;
It has anti-aging and water resistance, and prevents color transparency, fading, discoloration, "tearing", slurry and other phenomena.
-
This should be a renovator's business, right?
-
Yes, it's fine sand and lime.
Wrapping is carried out at the time of renovation. Generally, Ette board or brick wall building is used, and some people use large core board or MDF.
There are two main reasons for the leakage of the bathroom, one is that there is a leak in the waterway of one's own house, and the other is that the top layer of waterproofing is not up to standard. You can ask the master to check whether the sewer pipe is not tightly closed, focusing on the water pipe of the basin and toilet, and the workers may damage these two places if they do not pay attention during the decoration. >>>More
There are brushed yes, such as Sika, K11, JS, etc., and paved, such as polypropylene, SBS. Polypropylene and Sika and K11 are better, don't be greedy for cheap, use it for a lifetime.
The yellowing of the water is caused by the change in the color of the water caused by rust or sediment in the water. >>>More
As follows, 1, it is better to use sky blue tiles, so that the spirit is more relaxed. >>>More