How long does it take to repair a leak in the kitchen bathroom

1. Judgment of pipeline leakage.

Pipe leakage refers to the leakage caused by the damage of the upper and lower water pipes, floor drains and toilet interfaces

1) Leakage of water pipes.

The manifestation of this situation is: the leakage is continuous, uninterrupted, and sometimes the leakage volume also has the phenomenon of increasing continuously, such as closing the main valve of the water pipe, the leakage will be reduced immediately.

2) Leakage of sewer pipes.

First observe the leakage and make a record, then open all the faucets, toilets and pour water into the floor drain, if the leakage increases, it means that the pipe is damaged and leaking.

2. Surface leakage.

There are two ways to identify surface leakage, and the specific identification methods are as follows:

1) Leakage occurs only under the conditions of bathing, mopping and other conditions, that is, when the ground and wall are drenched and stagnant, and in this case, it can be determined as surface leakage.

2) Use the method of inspection and identification of pipeline leakage to carry out inspection, if it is judged that it is not pipeline leakage, it is surface leakage.

After judging the cause of the water leak, the trick introduced to you is about to make a grand debut! If the bathroom is only leaking on the surface, do not need to knock on the tiles, as long as some special waterproof materials are sprayed on the tile joint, the kitchen and bathroom can be used normally after four hours of construction, which not only shortens the construction period, reduces the cost, but also does not change the color of the tile, and is almost the same before and after construction, avoiding the trouble of not finding the matching tile due to knocking on the tile.

And if the pipe is broken, then the pipe needs to be repaired.