-
Anonymous users2024-01-23Rectangular chandelier installation method 1 in the living room of the new house
1. First of all, choose the location of the chandelier installation, and avoid the dark line buried in the chandelier or ceiling.
2. Embed iron or wood bricks in the structural layer, and the burial position should be accurate, and there should be enough room for adjustment.
3. Set up transition connectors on iron parts and wooden bricks in order to adjust the error of the parts, and can be nailed, welded and screwed through with the parts.
4. The boom, sling and transition connector are connected.
Installation Notes:
If there are multiple chandeliers during installation, attention should be paid to their position, length relationship, chandeliers can be installed at the same time as the ceiling can be installed, so that the position and height of the lamp can be adjusted according to the ceiling joists. The boom out of the ceiling must be used by direct exit method and casing method. The addition of a pipe facilitates installation and ensures that the ceiling panel is intact and can only be drilled where the outlet pipe is needed.
The hanging cup directly out of the ceiling is not easy to align when the board surface is drilled during installation. Sometimes the method of installing the boom first and then cutting the hole in the panel may be used, but it has an impact on the decorative effect. The boom should have a certain length of thread for adjusting the height.
The light box is suspended under the sling boom, and the reliability of the connection should be noted.
Rectangular chandelier installation method 1 in the living room of the new house
1. Take the hanging plate off the ceiling plate, align the empty hole on the western piece and select the appropriate position, if the vacant position has not been aligned, pay attention to adjust the position of the screw.
2. Then find the position that needs to be punched on the ceiling according to the installation strip, start drilling, select the appropriate size of the drill bit, and use the electric rotation to make a 6mm hole in the ceiling.
3. Punch the expansion bolt into the hole in the ceiling, you can use a hammer to knock the bolt into the hole, and then fix the hanging plate on the ceiling.
4. Wiring and fixing the lamp panel Turn off the power supply, connect the wire head of the power supply with the lamp wire, wrap the adhesive tape, and then fix the lamp plate to the back strip.
5. Install the bulb on the lamp plate Take out the bulb and carefully screw it on the lamp plate, and remember to turn on the light test when each bulb is installed to ensure the normal use of the lamp.
6. Install the relevant accessories according to the instructions Take out the parts in the box, install them according to the instructions of the drawings, hang the accessories together, and there are different accessories according to the style of the crystal chandelier, some only have bulbs, and some also include crystal balls, crystal bars, bead chains and other accessories. After all the hanging, check that the accessories are complete and whether they are properly hung to ensure safety, and then turn on the crystal chandelier to see the effect.
-
Anonymous users2024-01-221. Install the drill bit.
Choosing the right drill Install the drill bit.
Precautions: The hole on the ceiling is generally 6mm, and the installation is to choose a suitable drill gauge 2 and find the hole on the top plate of the suction cup.
Take the hanging plate off the ceiling plate, align the ceiling plate, screw 3, and drill holes.
Mark the wall with a drill.
Precautions: When drilling, be sure to pay attention to the depth of the hole.
4. Upper expansion screw.
Put the expansion screw into the hole and hammer it in.
5. Fixing the hanging plate.
Insert the expansion screws completely into the wall to fix the baffle.
6. Fix the ceiling tray and lamp body.
Connect the hanging plate and the ceiling tray with screws, tighten the screws, and fix the ceiling plate.
-
Anonymous users2024-01-21Generally, it is located in the center of the living room and vertically in the long direction towards the floor-to-ceiling balcony.
-
Anonymous users2024-01-20The rectangular chandelier must be installed parallel to the TV (i.e., horizontally) and fixed on the ceiling directly above the sofa and coffee table in the living room of the home.
-
Anonymous users2024-01-19Wear it horizontally! Parallel to the TV.
Examples of rectangular living room decoration are as follows. >>>More
There is no set choice for this, it depends on your own preferences. >>>More
The rectangular ceiling lamp in the living room should correspond to the long and short sides of the living room respectively (that is, the long side of the lamp corresponds to the long side of the living room, and the short side of the lamp corresponds to the short side of the living room), which makes it easier for people to feel upright. Of course, during installation, you can take the way of measurement and marking, first use a meter ruler to measure the distance from the ceiling decoration (the physical plane perimeter frame of the installation ceiling lamp) to the center, and then average the size of both sides, so as to ensure that the ceiling lamp is installed in the center position, and ensure that the installation of the lamps and lanterns is not out of place and offset by marking the line.
The size of the ceiling lamp is OK, if the room type is square, you can use a round ceiling lamp.
First of all, the decoration of the rectangular living room should be unified in the whole space, so as to reflect a better decoration effect. For example, the ceiling, walls, cabinets and floors of the room are all made of the same material, because the same color and texture contribute to a unified and harmonious visual effect, thus invisibly expanding the volume of the space. In terms of the choice of materials, wood has excellent warmth and natural beauty, which is a very good choice. >>>More