How to install a water heater from the kitchen to the bathroom

Updated on Kitchen 2024-01-27
5 answers
  1. Anonymous users2024-01-23

    If a gas water heater is installed, the distance is too far and the cold water from the original pipe will be drained every time the hot water is used. Generally, the pipe is acceptable within 3 meters, and it is recommended to install an electric water heater in the bathroom if it is too far away.

  2. Anonymous users2024-01-22

    Electric water heaters are installed in the bathroom, and kitchens are installed in the kitchen. Simple and practical. Otherwise, the hot water pipe is too long, and it takes a long time to open the faucet and wait for hot water, wasting water.

  3. Anonymous users2024-01-21

    This bathroom is equipped with a water heater, and the cabinet is installed with a kitchen treasure in the sink cabinet, so that the budget price may be more expensive, at least save a lot of unnecessary trouble.

  4. Anonymous users2024-01-20

    It's very simple, the geothermal pipeline is unchanged, so work on the tap water and the water heater, the series level is finished, but it is a little far, if you install the water heater in the kitchen then the bathroom will be slower when using hot water, the same is true, I suggest you, it is best not to press the water heater in the kitchen, because the kitchen has a way to make the water hot, so why bother.

  5. Anonymous users2024-01-19

    The gas wall-hung boiler is very suitable for burning floor heating, but it is not ideal for boiling hot water in the non-heating season, because washing the face and washing dishes with a little hot water will be turned off and turned on for a while, causing the gas and ignition to be turned on and off frequently and automatically, unless it is used for bathing for a long time. In addition, the plumbing between the bathroom and the kitchen also needs to waste some water. Therefore, it is recommended to install an electric water heater in the bathroom and a small kitchen treasure in the vegetable pool (if there is no embedded hot water pipeline).

    If possible, aluminum-plastic pipes are laid from the ceiling to connect the bathroom to the kitchen.

Related questions
1 answers2024-01-27

The bathroom is far away from the kitchen, and because of safety issues, gas water heaters cannot be installed in the bathroom. There are two workarounds for this,1 Connect a hot water pipe from the kitchen. 2Install an electric water heater in the bathroom. Hope it helps you and I wish you a happy life.

6 answers2024-01-27

The water heater should be treated as if it is too far away from the bathroom. Waste of water and time. Before every bath or hot water, you need to put out the cold water in the pipes, which is a waste of water and a waste of time for people to wait. >>>More

2 answers2024-01-27

It must be charged, and the charge for indoor punching is generally about 30 yuan. >>>More

1 answers2024-01-27

Gas water heaters are water-controlled and have a minimum water flow requirement, which is not met, and the water heater cannot release gas and turn on the ignition and cannot be used. >>>More

2 answers2024-01-27

If the water in the bathroom is completely cold, it means that the water heater has not been ignited, there may be a blockage of the pipeline, and the water temperature is not high enough, which is generally caused by too far away, the hot water pipe is not insulated, and the temperature loss is too large during the flow of hot water.