Who knows what to do if the insulated balcony leaks

<> Plugging is done indoors. Generally, the sealant and part of the embedded material around the window frame are removed, and then sealed after refilling; For outdoor processing, the jujube beam requires special types of high-altitude work, and the external wall insulation is first molded and slotted to the structure and then removed, sealed, sealed and waterproofed, and for those without external wall insulation, the plugging is directly eliminated and then sealed and waterproofed; For the waterproof layer damage and the leakage problem, it is necessary to find the seepage point to repair the leakage, for the situation of no waterproofing or serious leakage, the best solution is to do a good job of waterproofing the balcony again.

Check to see what the leak is, whether it is the wall leakage or the window leakage, find the corresponding method, find the leakage point of the window leakage, glue and seal, and make the wall leak waterproof.

Sealing balcony leakage is a headache in daily door and window life, but sealing balcony leakage is also a common phenomenon, there are two headaches of sealing balcony, one is water leakage, and the door and window leakage is not tight. >>>More

Many families' balconies begin to seep water from the outside to the inside during the rainy season, which is caused by the lack of waterproofing during the renovation. The first step to do a good job of waterproofing is to do a good job of waterproofing the balcony floor, ensuring that the ground has a slope, and the lower side is the drain. At the same time, it is necessary to ensure that there is a height difference of at least 2-3 cm between the balcony and the living room, and the ground should be made of marble as much as possible, which is both practical and beautiful. >>>More

1. What is the structure of your house, frame or brick and concrete? >>>More