The sound insulation of the solid wood floor is not good, and if you want to repave, how to operate

The reason why the sound is transmitted up and down the stairs is mainly caused by the impact sound being conducted through the solid keel.

With the principle of partitioning sound bridge, the elastic rubber pad (plate) is used, which can be added to the lower layer of the keel and the position where the floor touches the ground and the wall to better solve the sound transmission problem.

When using cork, the crack resistance is not good and it is easy to rot. The use of sound-absorbing materials can only solve the problem of noise in one's own home, and the noise of going downstairs has not been reduced at all.

A common problem with solid wood floors. It's the same regardless of the brand. The keel must be installed under the solid wood floor, and heavy objects are stacked on the keel, or the moisture is too heavy, or the use time is long, the keel is easy to age, and there will be it at that time"Gaga-jiga"of noise.

Solution: 1. Buy some sound-absorbing panels in the building materials market (the kind installed on the wall, there are many wooden, fiberglass, and aluminum, in this case, buy some fiberglass, because it is light and can be cut).

2. According to the gap between the keels, cut the fiberglass sound-absorbing panel and install it inside. This should be better than the original. In addition, if noise is a problem, it is recommended to use household PVC flooring.

Put some acoustic panels. I want the fiberglass kind.

It may be the quality of the floor, I originally bought Aijia green wood, there has been no such problem, you can go to the floor monopoly to ask!

It may be the quality of the floor, I originally bought the Aosen floor, there has not been this kind of problem, you can go to the floor monopoly to ask!