How to make waterproof around the toilet in the bathroom

The use of paint waterproofing, ordinary residential bathroom space is narrow, and there are pipelines through the floor slab, etc., so the commonly used paint waterproof and rarely use membrane waterproofing. The two kinds of waterproof coatings for toilets are generally used as waterproof materials today, while asphalt-based waterproof coatings are basically not used. Here are two coatings commonly used for waterproofing in the bathroom.

What to do if the toilet is clogged:

1.In many cases, even if the toilet is clogged, flush it more and it will pass. However, if it is so blocked, the consequences of your flushing will be even worse, and the whole bathroom floor will be black and yellow.

The most commonly used and easiest to think of is probably the leather pick. Also known as "water pluck". It's not technically difficult, and it's easy to use.

2.The method of use is: add water to the toilet, and then look at the amount of water can have a certain momentum, put the leather hammer at the mouth of the toilet and press it violently, as long as you hear a 'coo' sound, the explanation is clear;If it doesn't work, add more water, press again, and that's it.

Dun cloth method: use your mopping cloth to mop the floor. First put the cloth at the mouth of the toilet, and then put water to ensure that the water submerges the cloth.

Then press the cloth hard, stuff it into the toilet mouth as much as possible, and finally lift the cloth as fast as possible, repeat this action, the things in the toilet will be sucked out, and the pipe can be unblocked.

Toilet, belongs to the field of building water supply and drainage materials a kind of sanitary appliances, if there is water in the bathroom at home, it is estimated that it is the most unappetizing thing, but also makes many families distressed, let's talk about bathroom safety knowledge of how to do waterproof around the toilet toilet?

The toilet base is waterproof, at present, it is better, and the method once and for all is to make a circle of "plastic steel mud plugging glue" seal on the edge of the toilet base, and then place the toilet on the "plastic steel mud plugging glue". Then use "plastic steel mud plugging glue" to hook the joint. The early fruit of the effective ear is much superior to that of glass glue.

"Plastic steel mud plugging glue" is easy to operate, dry quickly (30 minutes), strong adhesion, superior waterproof performance, rigid after drying, never blackened and other advantages. For specific performance and how to use, please refer to the product description of "Plastic Steel Mud Plugging Glue".

If the toilet has been installed and has been hooked, how to make waterproofing around the toilet Zizu orange toilet? Just on the edge of the base of the toilet, seal it with "plastic steel mud plugging glue". However, at the same time, it is better to remind that it is better to refer to the brand of toilet toilet in the bathroom when purchasing. Traces.

1.Pay attention to the waterproof treatment of the seams. The joints between the bathroom wall and the floor, as well as the joints between the pipes and the floor, are often error-prone. In the construction process, we must urge the construction personnel to do the work carefully.

2.After the waterproofing treatment is done, finally do a waterproofing experiment. The owner can block all the drains in the bathroom and circumference the doorway about 20 cm high.

After 24 hours, re-check for leakage. This 24-hour waterproof experiment is currently being promoted in the industry.

3.It is best to use a waterproof socket with a buckle box. Because there is more water in the bathroom, it is possible to ensure the safety of electricity to the greatest extent with the socket of the buckle box. Homeowners may also consider placing restroom power switches and outlets outside the restroom.

4.Due to the small space in the bathroom, it is best to use small wall and floor tiles in order to make the interior of the bathroom more harmonious.

The bathroom is waterproof, the ground needs to be done all, the wall needs to be at least meter, it is recommended to do the full height, and the waterproof material used is the same as the wall.

The bathroom is not only small in area and has many pipes, but also more than 80% of the water leakage problems are concentrated in the yin and yang corners, pipes, sanitary ware, floor drain periphery, and the surrounding of the toilet belongs to the periphery of sanitary ware, so these places need to pay special attention when doing waterproofing, the kitchen and bathroom waterproof slurry adopts the concept of repairing and strengthening the key parts and then doing waterproofing as a whole, that is, first use the quick-setting repair mortar to carefully and evenly paint the parts that are prone to water seepage, and then use the waterproof slurry to do waterproofing as a whole, so that the special material is dedicated, the waterproof effect is better and the life is longer.

Of course, in addition to choosing the right waterproofing material, standard construction is also important, and only in this way can the best waterproofing effect be guaranteed.

Just fill the EL1301 around the toilet, I hope it helps you.

The toilet will not leak, the sewer pipe needs to be covered with a sealing ring or a grease ring and then install the toilet, if the toilet leaks it needs to be removed and reinstalled.

The requirements for beauty are putty powder rubbed around, and the window sill is waterproof.

Hello! The toilet base is waterproof, at present, it is better, and the method once and for all is to make a circle of "plastic steel mud plugging glue" seal on the edge of the toilet base, and then place the toilet on the "plastic steel mud plugging glue". Then use "plastic steel mud plugging glue" to hook the joint.

The effect is much better than glass glue. "Plastic steel mud plugging glue" is easy to operate, dry quickly (30 minutes), strong adhesion, superior waterproof performance, rigid after drying, never blackened and other advantages. For specific performance and how to use, please refer to the product description of "Plastic Steel Mud Plugging Glue".

If the toilet has been installed and the seam has been hooked, it can be sealed with "plastic steel mud plugging glue" on the edge of the toilet base.