-
Anonymous users2024-01-23THE COMMONLY USED SPECIFICATIONS OF DOWNLIGHTS FOR HOME DECORATION ARE 2 INCHES AND INCHES, THE OPENING SIZES ARE 72MM AND 85MM RESPECTIVELY, THE HEADROOM HEIGHT AFTER INSTALLATION IS 110MM, AND THE MAXIMUM HEIGHT AFTER ADJUSTMENT IS 130MM, SO IF FRIENDS PLAN TO CHOOSE DOWNLIGHTS, THEY SHOULD RESERVE THE SPACE HEIGHT OF THE CEILING IN ADVANCE. Downlight has a certain decorative nature, and its light source generally adopts energy-saving lamps, which belong to diffuse lighting.
-
Anonymous users2024-01-22There are two kinds of downlights, which can be divided into open and concealed, you are talking about concealment, if there is no problem of ceiling thickness, anyway, the downlight should be exposed, the stainless steel surface is still quite decorative, if you have to conceal at least 15 cm or more.
-
Anonymous users2024-01-21The downlight is still a bit high, it is recommended to use a spotlight, which is generally only 5-6 cm. And the lighting effect of spotlights is much better than that of downlights, and the keel is made of wood, which can minimize the overhead space. Because the minimum limit of light steel keel rings and booms is also 8-10 cm.
-
Anonymous users2024-01-20THE SMALLEST LIGHT HAS A 10MM LIGHT, BUT TO CONSIDER WHETHER IT WILL FIT YOUR HOME, YOU'D BETTER FIND THE LIGHT FIRST AND THEN THINK ABOUT CONSTRUCTION.
-
Anonymous users2024-01-19If the ceiling keel is made of light steel keel, the minimum height is about 8 cm, and decorative spotlights can be used, generally about 5 or 6 cm.
-
Anonymous users2024-01-18The headroom should not be less than 12cm
Depending on which material you choose, the thickness of the general aluminum gusset is between, and the thickness of the polymer composite material is 2-3mm
The aluminum gusset of the same aluminum material is better in terms of thickness. But the general engineering aluminum gusset has millimeters, regret or even thicker and straight, why? Because some of the engineering gusset is very long, in order to prevent deformation, so it is necessary to use a thicker, harder one, on the contrary, the aluminum gusset for home decoration is rarely more than 4 meters, and there is no heavy object on the aluminum buckle ceiling, so to speak, millimeters are enough.
Tooling generally uses plates of thickness; For home decoration, the thickness of the plate is used less, and it is generally used or thick. In view of the fact that there is no fundamental difference in aesthetics and practicality in the actual use of the two thicknesses of the plate, and the relative price of the plate is low, the aluminum buckle plate with medium thickness in home decoration is the mainstream choice of home decoration at present.
Generally, the height of the ceiling in the living room is set according to the distance between the roof and the ground. Generally, the direct ceiling is designed as an ordinary ceiling at the four corners of the living room. After the general home renovation ceiling, the distance is about a meter high. >>>More
The thickness of the aluminum gusset used in home decoration and engineering is generally and. Because this thickness of aluminum gusset is the most cost-effective, it can fully meet the bearing strength. If the thickness is thickened, it will not only waste resources, but also increase the unnecessary economic burden on consumers.