What is a good hinge on a solid wood door with what kind of hinge

On the market, most of the inferior hinges are made of iron, with a thickness of less than 3 mm, and the general surface is rough, uneven plating, impurities, and some are of different lengths, and the deviations of hole position and hole spacing do not meet the decoration requirements. Moreover, the disadvantage of ordinary hinges is that they do not have the function of spring hinges, and after installing the hinges, they must be equipped with various bumping beads, otherwise they will blow the door panel.

Ordinary doors can use 4-inch hinges, such as round wooden doors, and solid wood doors are still recommended to use 5-inch hinges, which can be loaded.

The materials of the hinge are: stainless steel, copper, alloy.

Copper is more expensive and firmer.

1. Good hinges are in the form of bearings, generally there are 4 bearings in one.

2. There is damping oil in the hinge, if you put a hinge horizontally, the hinge is neither immovable, nor does it fall down all at once, but slowly slides down, so the advantage is that when you close the door in the future, it will not be difficult, and the door will not hit the door frame.

3. Good hinges have brass and stainless steel, and the more yellow the brass hinges, the better, which indicates that the copper content is high, and the hinges that can be made of 62 copper (may be the content of copper) are very good.

4. Poor hinges will cut corners, generally hinges are 76X102cm, poor hinges will be made smaller, in order to save costs.

5. Another way to cut corners is that the thickness of the hinge is not enough, the good hinge can be 3mm thick, and the poor hinge is thin.

6. The damping oil of a good hinge will not leak, which is not easy to observe, so you can only ask the dealer. I found that my Fanglin hinge has dew after half a year of use, so Fanglin is not the best, but it is just good and cheap.

Personally, I feel that there is no big problem with the things made by the general manufacturers, such as the hinges and hardware of Modern Deman, etc., and I suggest that you go to the building materials city to find a good hinge according to the method I introduced.

Hinges are also known as hinges and are officially known as hinges. It is often composed of a two-fold type, which is a part that connects two parts of an object and can make it move. Hinges are essential hardware for doors and windows, so what material is better for interior doors with hinges?

Interior door is often used in the process of modern home decoration of a class of products, its quality and quality directly affect the texture of the entire home decoration, so with some small hardware can not be ignored, especially the use of more frequent hinges, the current market mainly has copper material and stainless steel material.

The interior door hinges are made of copper and stainless steel. The standard of monolithic hinge area is 10cm 3cm and 10cm 4cm, the diameter of the central shaft is between to, and the wall thickness of the hinge is to 3mm. The gap and strength of the load-bearing wheel determine the flexibility and noise of the opening and closing of the sliding door, and the load-bearing wheel with uniform rotation should be selected.

The entrance door must meet the safety factor standard and be strong enough, while the interior door pays more attention to beauty and convenience. Bedroom doors, living room doors are not often closed, not often locked, you can buy the number of switches to ensure less, generally 100,000 times is enough, 200,000 times is a bit "overkill", and bathroom door locks, switches and locks the frequency is higher, to buy a better quality, switch times to ensure that the door handle is higher. There are many door locks on the market, similar styles, we can judge the quality of this door lock from the feel, weight, workmanship and other aspects when choosing, the heavier the lock, the heavier the lock cylinder, the thicker the material of the lock cylinder, the more resistant to wear.

The finish of the surface of the lock depends on whether it is delicate and smooth, without spots, and then repeatedly opened with the key to see the sensitivity of the lock cylinder spring.

In addition, although the copper hinge has a strong texture, it is easy to rust during use, and if the use environment is more humid, it will cause very serious damage, while the stainless steel hinge will not appear at all, so consumers can choose according to their actual situation!