How to make a lazy sofa

1. Tools and materials needed: sewing machine, drawings and paper patterns, inner bag (white twill, but preferably a non-woven cover with good ventilation), filling (Styrofoam particles, generally about 3 catties), outer sofa cover (your favorite twill, or polyester cloth, suede, plush).

Second, the lazy sofa production steps:

1. Drawing, cut 2 pieces above and below, and cut the edge part into 4 pieces. If you are not a skilled worker, it is recommended to cut the paper pattern first.

2.Cut inner pockets.

3.Sew the inner bag, and sew the inside of the bag with two front and back to prevent the filling inside from being exposed.

4.The sofa jacket is sealed, and in order to facilitate disassembly and cleaning, you can choose adhesive or zipper.

5.Fill the filler. When adding padding to the inner bag, don't fill it too much, just put it in the coat, because the mouth of the coat is not very large, first put the inner bag into the coat, and then continue to pack, when it is not completely full, sew it well.

If the filling is too full, it will not change its shape easily.

6.Stitch the coat well.

The steps of how to make a lazy sofa are as follows:

1.Refer to Size, Shape, Material 2Buy "beans", scientific name Styrofoam particles, or polystyrene foam granules 3

For the drawing, the upper and lower squares were selected, and the whole was a cuboid shape. 4.According to the cloth required by the drawing, go to the cloth market to buy cloth heads.

The sofa is made of elastic fabric, I didn't dare to try it, only the rough thick cotton fabric was selected as the fabric, and the lining must be strong and the texture should be dense. 5.Cut, click.

6.Sewn a sew. The bag inside was sewn with two sews, and I was afraid that the beans would run out naughtily.

7.Sofa jacket closure. In order to facilitate disassembly and cleaning, I chose adhesive paste, and the zipper would be better, but I didn't have it at hand.

8.Fill the beans in the bag inside. Don't put it in the coat when it's too full, because the mouth of the coat is not very big, and then continue to fill it, don't sew it when it's completely full, it's not easy to change the shape if it's too full.

9.Glue your coat and sit back to your heart's content.

Here's how to make a lazy sofa, you can try it:

First use a ruler to measure a square piece of fabric of the desired size, point a point in the middle, then cut from one side of the cloth to the middle point, cut a triangle, and then sew the triangle well, like a cone, cut it with scissors underneath, or cut it according to the shape you want, and then use a piece of cloth to sew along the edge of your cut, remember to put the filling in when it is almost sewn.

Note: If the cloth is a square is easier to operate, the triangle can be cut from which side, if it is rectangular, it is best to cut it into a square, cut it is easy to master, the height depends on the size of the triangle you cut, the larger the triangle, the shorter the height, and the size of the sofa is large, you need to determine it at one time.

I tried to make one myself, and it's ok, but it's not very strong, you can try it.

The size is up to you, you can first use a ruler to measure, the size you want, I myself is to put a large piece of cloth in the middle of a point, and then cut from one side of the cloth to the middle point, cut a triangle, and then sew the triangle well, like a cone, cut it with scissors below, or cut it according to the shape you want, and then use a piece of cloth to sew along the edge of your cut, remember to put the filling in when it is almost sewn.

Note that if the cloth is square, it is good to say, the triangle can be cut from which side, if it is rectangular, it is best to cut it into a square, cut it to be easy to master, the height depends on the size of the triangle you cut, the larger the triangle, the shorter the height, and large, you have to measure it, otherwise it is more troublesome.

The method of making a lazy sofa is very simple and only requires a few basic materials and tools to complete.

Tools needed: scissors, pencils, curved rulers, tape, drills, drill bits, screwdrivers.

Materials needed: lots of sponges, cotton, rope, buckets.

Steps:1First, draw the outline of the lazy sofa on a wooden board and customize it to your needs and preferences.

2.Then, use an electric drill and drill bit to dig a hole in the plank, the diameter of the hole should be slightly larger than the diameter of the rope.

3.Next, draw the same shape on the sponge as the outline of the plank, cut it to the right size with scissors, and stack them in turn until the height and hardness of the sponge meet your requirements.

4.Wrap the sponge in a cotton cloth and attach it to the sponge with tape.

5.Turn the barrel over and fix the plank to the barrel with a screwdriver.

6.Thread the rope through the hole in the plank and fix it to the barrel on all sides.

7.Finally, cover the top of the sofa with a cotton cloth.

After completing the above steps, the lazy sofa after the mess is made. The biggest feature of this lazy sofa is that it is simple and practical, low cost, can be made in a short time, and can be customized according to your needs and preferences, which can become a good home decoration.

Styrofoam granules (lazy sofa filling), fabric, ruler, needle and thread, scissors.

01 Before making a lazy sofa, you must cut the fabric. The cutting of the fabric is divided into outer cloth and inner lining cutting.

03 Then we cut the lining, first put the lining on the cut outer cloth and compare.

05 Sew the cut inner lining and outer cloth separately with a sewing machine, and remember that there must be a gap for the sewing of the outer cloth and the inner lining.

06 Put the sewn lining into the outer cloth, and the mouth of the inner lining should be the same as the mouth of the outer cloth.

07 Fill the purchased Styrofoam granules into the bag, do not overfill it and leave some space.

08 Finally, sew the inner lining and outer cloth.

09 The lazy sofa was successfully made.

The zipper can be sewn on the closure for easy washing!