-
Anonymous users2024-01-23During construction, the entire sewer pipe of the toilet should be closed first, and only local treatment should be done;
Secondly, the toilet riser should be surrounded by soundproof panels or soundproof cotton and other soundproof materials to package the pipes in multiple layers;
Finally, the riser is surrounded by light steel keel or light bricks, so that the pipeline can achieve a good effect of reducing noise and moisture.
Note: Try not to use wooden keels to prevent the wooden keels from expanding due to moisture and cracking.
When choosing sound insulation materials, be sure to choose products of reliable quality. Because traditional sound insulation materials often contain some harmful substances to the body, therefore, the selection of good quality sound insulation materials can reduce the harm of harmful substances to the human body.
The sewer pipe is generally made of rock wool for sound insulation treatment (must be closed, it is said that rock wool can cause cancer), but generally even if a simple sound insulation is done, the noise will still be heard, just reduced, if there are higher requirements for sound insulation, you can also use wooden boards to make a box, wrap the sewer pipe and then fill it with foaming and other sound-absorbing materials, in addition, with the help of the choice of ceiling materials to reduce noise. Such as: sound-absorbing board, PVC foam board, etc.
-
Anonymous users2024-01-22Wrap 15mm thick rubber and plastic cotton on the sewer pipe, and if you feel that the effect is not good, you can make a decorative package.
-
Anonymous users2024-01-211: First wrap a layer of 5 8mm thick foam sound insulation and shock absorbing pad on the pipe.
2: Tie a layer of 30mm thick eco-friendly soundproof cotton on top of the bread.
3: Finally, put a layer of bread on the soundproof cotton and put a layer of environmentally friendly soundproof felt.
4: Tie it tightly with wire or nylon cable ties.
During construction, the entire sewer pipe of the toilet should be closed first, and only local treatment should be done; >>>More
The pipe is running in a hurry, such noise is so annoying, I believe everyone has had such an annoying experience, the wastewater from the sewer pipe often produces a lot of noise, which causes great trouble to the downstairs neighbors. So, how to do a good job of sound insulation of toilet sewer pipes? Next, let's introduce how to make sound insulation in the bathroom! >>>More
Generally, the family can meet the requirements with 5cm gradient sound-absorbing cotton, and gypsum board can usually isolate 20-30 decibels of noise, if there are special requirements, you can use two layers of 5cm thick gradient sound-absorbing cotton, and gypsum board can usually isolate 30-40 decibels of noise, I don't know if it can meet the requirements of the landlord.
There are two main reasons why the sewer pipes in the home need to be wrapped, one is to be soundproof, and the other is to make it look more beautiful. Here are a few ways to wrap the sewer pipe. >>>More
Make a ceiling in your bathroom, the space can be a little larger, so that at least the sound of urinating upstairs will not be so clear, the sound of the drainage hall is mainly from the drainage pipe, you can use gypsum board to wrap the drainage pipe, the sound will be much smaller. For more information, please refer to the Rizhao real estate supermarket network.