-
Anonymous users2024-01-23The POS machine does not need to be connected to the kitchen receipt printer, the POS machine is an ordering machine, used to order, the ordering machine is connected to the server, and the kitchen printer is connected to the parallel port line behind the server!
If you still don't understand, look at the information below, I wrote it myself! Tianzixing catering software kitchen printer setup steps: roughly divided into hardware and software two major preparations.
1. Hardware preparation.
1. There is a main parallel port line behind the server--- which is divided into 4 secondary parallel ports to connect to the printer in the kitchen, and the secondary parallel port line is connected to the remote controller first.
2. The remote controller connects the network cable (the other end of this network cable is used to connect the module, the length of the network cable extends from the server to the module position, and then extends outward one meter to make a backup, the position of the network cable on the module, according to the color of both sides of the module periphery, use the tangential knife to card the network cable in the module slot).
3. The other end of the module is connected to the network cable (this network cable is generally one meter), and the network cable is connected to the remote print controller.
4. Connect the remote print controller to the kitchen printer.
2. Software preparation.
1. Install the catering printer service program, and after installation, run the printer service program.
Second, the point is added, the name you fill in according to your needs, the machine number is selected as the name of the server, generally Server, the port starts from 2, and the server itself occupies the first port 1; Format setting single-cut; Other kitchen printers are the same as the settings above.
3. Enter the catering software, find the kitchen printing management, and set the printing category in turn (the setting name should be consistent with the name of the printer service program.) ), floor printing settings, printing dish settings, and kitchen parameter settings.
-
Anonymous users2024-01-22The POS machine is generally connected to the kitchen receipt printer through the network, so we also need to buy the network port kitchen receipt printer when we use it.
It is not possible to install a kitchen printer on a POS machine. >>>More
Mainly depends on the service situation of your store, if it is just to solve the cashier, the traditional POS can strengthen a few QR codes, if it is to pursue service and member marketing, you can use smart POS, scan code payment, bank card payment, all kinds of pay, member discounts, etc. can be realized on the machine, you can refer to Shengteng K9, if the scale of your store is not large, you can directly paste a few QR codes, support mobile phone payment on the line, it is recommended to find a regular third-party company to handle.
Use Kaiser, or Besunyen Changrun tea, and then use honey to condition, and use bananas dipped in honey to eat, it is very effective, I have tried,
For stainless steel, the easiest way is to rub some flour with a damp cloth and it will be as clean as new. If it is a plastic faucet, in addition to using this method, you can also use a damp cloth to stick edible vinegar or soot to wipe it. Of course, the effect of using some detergents sold in the market is also good, and in today's financial turmoil, it is better to hold your pockets tight.
Choose special yellowing-resistant paints (topcoats) and yellowing-resistant curing agents, and also do a good job of sealing the bottom to prevent yellowing caused by the grease in the wood.